基于Intersil公司的ISL94202锂电池组监测方案
原标题:Intersil ISL94202锂电池组监测方案
Intersil公司的ISL94202是锂电池组监测集成电路,支持三到八个电池组,支持锂离子 CoO2, 锂离子Mn2O4和锂离子FePO4化学电池,提供完整的电池监测和电池组控制,具有自动关断和恢复以及自动控制电池组的平衡,不需要微控制器.主要用在电动工具,电池备份系统,小型电动车,手持设备,能量存储系统,太阳能农场,医疗设备,监视设备和通风设备.本文介绍了ISL94202主要特性,功能框图和应用框图,以及评估板ISL94202EVKIT1Z主要特性和测试框图,电路图,材料清单和PCB设计图.
The ISL94202 is a Li-ion battery monitor IC that supports from three to eight series connected cells. It providescomplete battery monitoring and pack control. The ISL94202 provides automatic shutdown and recovery fromout-of-bounds conditions and automatically controls pack cell balancing.
The ISL94202 is highly configurable as a stand-alone unit, but can be used with an external microcontroller, whichcommunicates to the IC through an I2C interface.
ISL94202主要特性:
• Eight cell voltage monitors support Li-ion CoO2, Li-ion Mn2O4, and Li-ion FePO4 chemistries
• Stand-alone pack control - no microcontroller needed
• Multiple voltage protection options (each programmable to 4.8V; 12-bit digital value) and selectable overcurrentprotection levels
• Programmable detection/recovery times for overvoltage, undervoltage, overcurrent, and short-circuit conditions
• Configuration/calibration registers maintained in EEPROM
• Open battery connect detection
• Integrated charge/discharge FET drive circuitry with built-in charge pump supports high-side N-channel FETs
• Cell balancing uses external FETs with internal state machine or external microcontroller
• Enters low power states after periods of inactivity
• Charge or discharge current detection resumes normal scan rates
ISL94202应用:
• Power tools
• Battery back-up systems
• Light electric vehicles
• Portable equipment
• Energy storage systems
• Solar farms
• Medical equipment
• Hospital beds
• Monitoring equipment
• Ventilators
评估板ISL94202EVKIT1Z
The ISL94202EVKIT1Z is a kit that facilitates testing of theISL94202 Li-ion battery pack monitor and control ICs. TheISL94202 monitors cell voltage, current, and temperature. It converts the cell voltages, pack current, and temperatures to12-bit digital values, provides cell balance control, andprovides complete stand-alone battery pack operation.
Default stand-alone operation of the ISL94202 can beoverridden by an external microcontroller. The PC basedGraphical User Interface (GUI) includes functions to monitorstand-alone operation and to demonstrate operation with anexternal microcontroller.
评估板ISL94202EVKIT1Z主要特性:
• Status LEDs monitor RGO, EOC, SD, and PSD conditions
• Jumper configuration single or split path applications
• Wakeup push button for “Exit Sleep” control
• FETs off push button for quick all FETs off condition
• Cell balance LEDs for MCB process observation
• PCB layout accommodates “solder braid” addition for highcurrent evaluation
• Software enables real time observation and data collectionof 14 analog measurements and 27 digital status indicatorsSpecifications
This board has been configured and optimized for the followingoperating conditions:
• Configurable to 3 to 8 cells, default 3 cells
• Standard cell voltage range 2.699V to 4.250V
• OV/UV delay times 1 and 4 seconds respectively
• CB maximum delta voltage 0.501
• CB maximum/minimum voltage 4.032V and 3.100V
图.评估板ISL94202EVKIT1Z外形图
评估板ISL94202EVKIT1Z材料清单:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。