基于Maxim公司的MAX20733高效35A负载电流电源解决方案
原标题:Maxim MAX20733高效35A负载电流电源解决方案
Maxim公司的MAX20733是全集成高效开关稳压器,工作电压从4.5V到16V,负载电流高达35A,峰值效率高达90.8%,具有极好的响应时间,支持负载高达300A/μs瞬态响应,主要用在通信设备,网络设备,服务器和存储器设备,点负载电压稳压器,微处理器芯片组,存储器VDDQ和I/O.本文介绍了MAX20733主要优势和特性,框图,应用电路,以及参考电路图,评估板MAX20733 EVK主要特性,电路图,材料清单和PCB设计图.
The MAX20733 is a fully integrated, highly efficient switching regulator for applications operating from 4.5V to 16V and requiring up to 35A maximum load. This single-chip regulator provides extremely compact, high-efficiency power-delivery solutions with high-precision output voltages and excellent transient response for networking, datacom, and telecom equipment.
The IC offers a broad range of programmable features through capacitors and resistors connected to dedicated programming pins. Using this feature, the operation can be optimized for a specific application, reducing the component count- and/or setting-appropriate trade-offs between the regulator’s performance and system cost. Ease of programming enables using the same design for multiple applications.
The MAX20733 includes protection capabilities. Positive and negative cycle-by-cycle overcurrent protection and overtemperature protection ensure a rugged design. Input undervoltage lockout shuts down the device to prevent operation when the input voltage is out of specification. A status pin provides an output signal to show that the output voltage is within range and the system is regulating.
MAX20733主要优势和特性:
High Power Density and Low Component Count Overall Solution Size: 509mm2 Including Inductor and Output Capacitors
90.8% Peak Efficiency: VDDH = 12V and VOUT = 1V
Fast Transient Response: Supports Up to 300A/μs Load Step Transients
Optimized Component Performance and Efficiency with Reduced Design-In Time
Increased Power-Supply Reliability with System and IC Self-Protection Features Differential Remote Sense with Open-Circuit Detection
Hiccup Overcurrent Protection
Programmable Thermal Shutdown
MAX20733应用:
Communications Equipment
Networking Equipment
Servers and Storage Equipment
Point-of-Load Voltage Regulators
μP Chipsets
Memory VDDQ
I/O
图1.MAX20733功能框图
图2. MAX20733典型应用电路图
评估板MAX20733 EVK
The MAX20733 Evaluation Kit (EV kit) serves as a reference platform for evaluating the MAX20733 voltage regulator IC. This single-chip, integrated switching regulator provides an extremely compact, low-cost, highly efficient, fast, accurate and reliable power delivery solution for emerging low-output voltage applications up to 35A. Refer to the MAX20733 IC data sheet for more information.
The EV kit consists of a fully assembled and tested PCB implementation of the MAX20733. Jumper pins, test points, and input/output connectors are included for flexibility and ease-of-use in a wide range of applications.
The evaluation board is configured with an “edge strip” to allow high di/dt loading when evaluating the system. The +VOUT connection is on the top side, while the return (or -VOUT) is on the bottom side, directly mirroring the top-side strip. Either solder directly to the output “strip” or use the J8 terminal block to interface to a load.
评估板MAX20733 EVK主要特性:
High Efficiency and Power Density
Low Component Count
Small Solution Size 509mm2 Including Inductor and Output Capacitors
Optimized Performance
Reduced Design-In Time
Proven PCB Layout
Fully Assembled and Tested
评估板MAX20733 EVK材料清单:
详情请见:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。