原标题：PowerInt SID1183K单路1700V IGBT和MOSFET驱动方案

　　PowerInt公司的SID1183K是采用eSOP封装的单路1700V IGBT和MOSFET驱动器,栅极峰值驱动电流高达8A,集成的FluxLink™在初级和次级间提供电隔离,高达75kHz开关频率,传输时延260ns,传输时延抖动±5 ns,工作温度-40℃ 到125℃,主要用在通用和伺服驱动,UPS,太阳能,焊接逆变器和电能源.本文介绍了SID1183K产品亮点,功能框图,应用电路以及采用scaLE™- iDriver SID1183K通用基板参考设计RDHP-1702主要特性,电路图,材料清单和PCB设计图.

　　The SID1183K is a single channel IGBT and MOSFET driver in an eSOP package. Galvanic isolation is provided by Power Integrations’ innovative solid insulator FluxLink technology. The up to 8 A peak output drive current enables the product to drive devices up to 600 A without requiring any additional active components. For gate drive requirements that exceed the stand-alone capability of the SID1183K, an external booster may be added. Stable positive and negative voltages for gate control are provided by one unipolar isolated voltage source.

　　Additional features are short-circuit protection (DESAT) with Advanced Soft Shut Down (ASSD), undervoltage lock-out (UVLO) for primary-side and secondary-side and rail-to-rail output with temperature and process compensated output impedance guarantee safe operation even in harsh conditions.

　　Controller (PWM and fault) signals are compatible with 5 V CMOS logic, which may also be adjusted to 15 V levels by using external resistor divider.

　　SID1183K产品亮点:

　　Highly Integrated, Compact Footprint

　　Split outputs providing up to 8 A peak drive current

　　Integrated FluxLink™ technology providing galvanic isolation between primary-side and secondary-side

　　Rail-to-rail stabilized output voltage

　　Unipolar supply voltage for secondary-side

　　Suitable for 1700 V IGBT and MOSFET switches

　　Up to 75 kHz switching frequency

　　Low propagation delay time 260 ns

　　Propagation delay jitter ±5 ns

　　-40℃ to 125℃ operating ambient temperature

　　High common-mode transient immunity

　　eSOP package with 9.5 mm creepage and clearance distances

　　Advanced Protection / Safety Features

　　Undervoltage lock-out protection for primary and secondary-side (UVLO) and fault feedback

　　Short-circuit protection using VCE SAT monitoring and fault feedback

　　Advanced Soft Shut Down (ASSD)

　　Full Safety and Regulatory Compliance

　　100% production partial discharge test

　　100% production HIPOT compliance testing at 6 kV RMS 1 s

　　Basic insulation meets VDE 0884-10

　　Green Package

　　Halogen free and RoHS compliant

　　SID1183K应用:

　　General purpose and servo drives

　　UPS, solar, welding inverters and power supplies

　　采用SCALE™- iDriver SID1183K通用基板参考设计RDHP-1702

　　This application proposal provides a circuit design for a general purpose base board for driving various IGBTpower modules.

　　The design is proposed for the following application conditions:

　　 General purpose applications and IGBT power modules

　　 Adaptations such as adjustment of gate resistors can easily be done

　　 Up to 8 A peak gate current

　　 Up to 1 W per channel

　　通用基板参考设计RDHP-1702主要特性:

　　 Suitable for IGBT power modules in various housings such as 17 mm dual, 17 mm six-pack,

　　 62 mm, PrimePACK™, etc. with a maximum blocking voltage of 1700 V

　　 Short-circuit detection with Advanced Soft Shut Down (ASSD)

　　 Electrical command inputs and status outputs

　　 0 V / 5 V command input logic

　　 0 V / 5 V status output logic

　　 Minimum pulse suppression

　　 Interlock of command inputs

　　 5 V supply voltage

　　 Single PCB solution with soldered-in gate driver IC

　　Summary and Features

　　 Suitable for IGBT power modules in various housings

　　 Up to 1200 V DC-link voltage

　　 Electrical interfaces

　　 Basic Active Clamping

　　 Short-circuit detection with Advanced Soft Shut Down

　　图5.通用基板参考设计RDHP-1702外形图

　　通用基板参考设计RDHP-1702材料清单:

　　详情请见:

rdhp_1702.pdf

1700v_scale-idriver_family_datasheet.pdf