原标题：ADI ADA4254 高压低功耗可编增益仪表放大器解决方案

　　ADI公司的零飘移ADA4254 高压低功耗可编增益仪表放大器(PGIA),设计用于过程控制和工业应用.ADA4254具有12二进制加权增益,从1/16 V/V 到128 V/V和三个可缩放增益1 V/V, 1.25 V/V和1.375 V/V,最终有36个增益设定.器件的功耗仅为22mW,使得器件是需要精度,强劲和低功耗的工业系统的极佳选择.器件的输入的复接器提供±60 V,保护放大器高输入高阻抗,同时在两个输入源之前切换.此外,集成的电磁干扰(EMI)滤波器阻隔RF噪音对放大器敏感的输入影响.ADA4254的安全特性包括检测内部和外部的故障.串行接口(SPI)支持循环冗余位校验(CRC)误差检测,以保证鲁棒通信,这些特性使得获得系统安全完整性等级(SIL)证书.输入失调电压小于±14 μV,输入失调电压飘移小于±0.08 μV/℃,工作温度−40℃ 到 +105℃.主要用在通用过程控制前端,数据采集系统以及测量和测试系统.本文介绍了ADA4254主要特性,简化功能框图,多种应用电路以及评估板ADA4254RU-EBZ主要特性,电路图和材料清单.

　　The ADA4254 is a zero drift, high voltage, low power programmable gain instrumentation amplifier (PGIA) designed for process control and industrial applications. The ADA4254 features 12 binary weighted gains ranging from 1/16 V/V to 128 V/V and three scaling gain options of 1 V/V, 1.25 V/V, and 1.375 V/V, resulting in 36 possible gain settings. The power consumption of the ADA4254 is a mere 22 mW, making the device an excellent choice for industrial systems that demand precision, robustness, and low power.

　　The zero drift amplifier topology of the ADA4254 self calibrates dc errors and low frequency 1/f noise, achieving excellent dc precision over the entire specified temperature range. This high level of precision maximizes dynamic range and greatly reduces calibration requirements in many applications

　　The input multiplexer provides ±60 V protection to the high impedance inputs of the amplifier, while providing the capability to switch between two input sources. In addition, integrated electromagnetic interference (EMI) filters block harsh RF noise from the sensitive inputs of the amplifier.

　　Various safety features on the ADA4254 detect both internal and external faults. The serial port interface (SPI) supports cyclical redundancy check (CRC) error detection to ensure robust communication. These safety features ease system safety integrity level (SIL) certification.

　　Seven general-purpose input/output (GPIO) pins, which can be configured to provide various special functions, are included in the ADA4254. An excitation current source output is available to bias sensors such as resistance temperature detectors (RTDs).

　　The ADA4254 is specified over the −40℃ to +105°C temperature range and is offered in a compact 5 mm × 5 mm, 28-lead LFCSP and a 24-lead TSSOP.

　　ADA4254主要特性:

　　Optimized for ADC synchronization

　　Low power: 22 mW (±12 V supplies)

　　12 binary gain steps from 1/16 V/V to 128 V/V

　　3 scaling gains: 1 V/V, 1.25 V/V, and 1.375 V/V

　　±60 V protected input multiplexer

　　Excellent dc precision

　　Low input offset voltage: ±14 μV maximum

　　Low input offset voltage drift: ±0.08 μV/°C maximum

　　Gain calibration via ROM

　　Low gain drift: ±1 ppm/℃ maximum

　　High CMRR: 116 dB minimum, G = 1 V/V

　　Low input bias current: ±1.5 nA maximum

　　High input impedance

　　Integrated input EMI filtering

　　Wide input supply range: ±5 V to ±28 V

　　Dedicated output amplifier supplies

　　7 GPIO ports with special functions

　　Sequential chip select mode

　　External multiplexer control

　　Excitation current sources

　　SPI port with checksum (CRC) support

　　Internal fault detection

　　Wire break test currents

　　On-chip test multiplexer

　　28-lead, 5 mm × 5 mm LFCSP, 24-lead TSSOP

　　Specified temperature range: −40℃ to +105℃

　　ADA4254应用:

　　Universal process control front ends

　　Data acquisition systems

　　Test and measurement systems

　　图1.ADA4254简化功能框图

　　图2.ADA4254典型电源配置图

　　图3.ADA4254和AD4007时钟同步电路图

　　图4.ADA4254和AD7768时钟同步电路图

　　图5.ADA4254电压/电流输入应用电路图

　　图6.ADA4254 3线RTD应用电路图

　　图7.ADA4254电流检测应用电路图

　　评估板ADA4254RU-EBZ

　　Evaluating the ADA4254 Zero Drift, High Voltage, Low Power, Programmable Gain Instrumentation Amplifier.

　　The ADA4254RU-EBZ evaluation board is designed to help users evaluate the ADA4254, which is offered in a 24-lead thin shrink small outline package (TSSOP) or a 28-lead lead framechip scale package (LFCSP). Figure 1 and Figure 2 show the front and back sides of the evaluation boards with the TSSOP package. The ADA4254RU-EBZ evaluation board is a 4-layer printedcircuit board (PCB). The evaluation board accepts A (SMA) edge mounted connectors on the inputs andoutputs to efficiently connect to test equipment or other circuitry. The ADA4254RU-EBZ evaluation board requires the following three supply domains.

　　A high voltage supply domain consisting of the supplypins, VDDH and VSSH, which are typically +28 V and −28 V respectively.

　　The analog output supply domain, AVDD, typically 5 V. The digital supply domain, DVDD, typically 3.3 V.

　　评估板ADA4254RU-EBZ主要特性:

　　Enables quick breadboarding and prototyping

　　Edge mounted SMA connector provisions

　　Easy connection to test equipment and other circuits

　　图8.评估板ADA4254RU-EBZ外形图(前边)

　　图9.评估板ADA4254RU-EBZ外形图(后边)

　　图10.评估板ADA4254RU-EBZ电路图(1)

　　图11.评估板ADA4254RU-EBZ电路图(2)

　　评估板ADA4254RU-EBZ材料清单: