基于Cypress的CY29412可编程晶体振荡器解决方案
原标题:Cypress CY29412可编程晶体振荡器解决方案
cypress公司的CY2941x/CY2942x系列是可编基于PLL的晶体振荡器解决方案,输出频率在15MHz和2.1GHz,其它频率可通过I2C接口配置,工作电压1.8V-3.3V,工作温度–40℃到 +105 ℃,非常适合用于通信如OTN, SONET/SDH, xDSL, GbE,网络,无线基础设备,测试和仪表,以及高速数据转换器.本文介绍了CY2941x/CY2942x系列产品主要特性,框图以及评估板CY3676 EVK主要特性,框图,电路图和材料清单.
The CY2941x/CY2942x is a programmable PLL-based crystaloscillator solution with flexible output frequency options. It is fieldor factory-programmable for any output frequency between15 MHz and 2.1 GHz. Other frequency options can be configuredwith the I2C interface. Using advanced design technology, itprovides excellent jitter performance across the entire outputfrequency range, working reliably at supply voltages from 1.8 Vto 3.3 V for ambient temperatures from –40℃ to +105℃. Thismakes it ideally suited for communications applications (forexample, OTN, SONET/SDH, xDSL, GbE,networking, wirelessinfrastructure), test and instrumentation applications, andhigh-speed data converters. Additionally, the VCXO functionenables use of the CY2941x/CY2942x series in applicationsrequiring a clock source with voltage control, and in discreteclocking solutions for synchronous timing applications.
CY2941x/CY2942x主要特性:
■ Low-noise PLL for integrated crystal applications
■ Differential Clock Output: re-configurable through I2C
■ Output frequency support from 15 MHz to 2.1 GHz
■ Fractional N PLL with fully integrated VCO
■ Works on an integrated fixed frequency crystal
■ LVPECL, LVDS, HCSL, and CML output standards available
■ Compatible with 3.3 V, 2.5 V, and 1.8 V supply
■ 150 fs typical integrated jitter performance (12 kHz to 20 MHzfrequency offsets) for outputs greater than 150 MHz
■ VCXO functionality provided with tunable Total Pull Range(TPR) from ±50 ppm to ±275 ppm
■ 8-pin LCC package 7.0x5.0 (CY2941x) or 5.0 x3.2(CY2942x)Mm
图1.CY2941x/CY2942x逻辑框图
CY29412评估板CY3676 EVK
CY3676 EVK is designed to enable you to evaluate the programmable clock device CY29412, the latest addition to programmable devices in Cypress’s timing product portfolio. The clock device CY29412 is a high performance programmable oscillator with one fractional PLL that generates any frequency up to 2.1 GHz with jitter as low as 110 fs. The device offers one differential output. CY29412 comes in 8-pin LCC package for industrial applications. The differential I/O standards supported are LVDS, LVPECL, High-Speed Current Steering Logic (HCSL) and Current Mode Logic (CML). The device also supports features like Voltage-Controlled Crystal Oscillator (VCXO), and provides user with I2C programming interface.
The CY3676 EVK allows you to evaluate both AC and DC parameters of the output signals by making required on-board termination settings.
The CY3676 EVK includes the following:
CY3676 Evaluation Board
USB Standard-A to Mini-B cable
Quick Start Guide
评估板CY3676 EVK主要特性:
Generating any frequency output between
15MHz and 2100MHz for Differential Outputs
15MHz and 250MHz for Single-Ended Outputs
Configurable output standards viz., LVPECL, HCSL, CML and LVDS
Class leading RMS phase jitter of 110fs
Voltage Controlled Crystal Oscillator (VCXO)
图2.评估板CY3676 EVK外形图
评估板CY3676 EVK材料清单:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。