0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >电源管理 > 基于Linear公司的LTM4643超薄四路3A μModule DC-DC解决方案

基于Linear公司的LTM4643超薄四路3A μModule DC-DC解决方案

来源: 中电网
2018-11-06
类别:电源管理
eye 275
文章创建人 拍明

原标题:Linear LTM4643超薄四路3A μModule DC-DC解决方案

  Linear公司的LTM4643是超薄四路DC/DC降压功率模块(μModule),每路输出3A,输出可并联以得到12A.模块包括了开关控制器,功率FET,电感和支持元件.输出电压4V-20V或2.375V-20V,输出电压0.6V-3.3V,主要用在FPGA,GPU和ASIC电源,PCIe和PCB背面安装.本文介绍了LTM4643主要特性,框图和几种应用电路以及演示板DC2453A主要特性,电路图和材料清单.

  The LTM®4643 is a quad DC/DC step-down μModule(power module) regulator with 3A per output. Outputs canbe paralleled in an array for up to 12A capability. Includedin the package are the switching controllers, power FETs,inductors and support components. Operating over aninput voltage range of 4V to 20V or 2.375V to 20V withan external bias supply, the LTM4643 supports an outputvoltage range of 0.6V to 3.3V each set by a single externalresistor. Its high efficiency design delivers 3A continuousoutput current per channel. Only bulk input and outputcapacitors are needed.

  Fault protection features include overvoltage, overcurrentand overtemperature protection. The LTM4643 is offeredin a 9mm .15mm .1.82mm LGA package with RoHScompliant terminal finish.

  LTM4643主要特性:

  nQuad Output Step-Down μModule® Regulator with3A per Output

  nWide Input Voltage Range: 4V to 20V

  nn2.375V to 20V with External Bias

  n0.6V to 3.3V Output Voltage

  n3A DC Output Current Each Channel

  n±1.5% Total Output Voltage Regulation

  nCurrent Mode Control, Fast Transient Response

  nParallelable for Higher Output Current

  nOutput Voltage Tracking

  nInternal Temperature Sensing Diode Output

  nExternal Frequency Synchronization

  nOvervoltage, Current and Temperature Protection

  n9mm.15mm.1.82mm LGA Package

  LTM4643应用:

  nFPGAs, GPUs and ASICs Applications

  nnPCIe and Backside PCB Mounting

  图1.LTM4643框图

  图2.LTM4643应用电路:输入4-20V,比例跟踪输出:1.2V,1.5V,2.5V和3.3V

  图3.LTM4643应用电路:输入2.375-5V,输出:1V,1.2V,1.5V和1.8V

  图4.LTM4643应用电路:输入4-20V,输出4相1.2V/12A,温度监测

  图5.LTM4643应用电路:12V和5V单独输入,1.2V/6A和3.3V/6A输出

  演示板LTM4643EVDC2453A

  Quad DC/DC μModule Regulator with Configurable 3A Output Array Demonstration circuit 2453A features the LTM®4643μModule® regulator, a high performance high efficiency4 output step-down regulator. The LTM4643EV has anoperating input voltage range of 4V to 20V and is ableto provide up to 3A out output current from each of itsphases. Each output’s voltage is programmable from 0.6Vto 3.3V.

  The LTM4643EV is a complete DC/DC point of loadregulator in a thermally enhanced 15mm .9mm .1.82mmLGA package requiring only a few input and output capacitors.Output voltage tracking is available through the TRACK/SS pin for supply rail sequencing. External clocksynchronization is also available through the CLKIN pin.

  The CLKOUT pin provides for synchronization of additionalmodules’ phases. The LTM4643 data sheet must be readin conjunction with this demo manual for working on ormodifying demo circuit 2453A.

  图6.演示板DC2453A外形图

图8.演示板DC2453A电路图

  演示板DC2453A材料清单:

  详情请见:

DC2453A1-SCH.pdf

4643f.pdf

dc2453afb.pdf


责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案