原标题：MicrochipCAN LIN CAN-FD汽车网络开发方案

　　microchip公司的CAN LIN CAN-FD汽车网络开发板采用8位,16位和32位Microchip MCU系列,提供低成本模块化平台,用于CAN, LIN, CAN-FD网络开发.具有四个mikroBUS™插座,支持CAN和CAN-FD. 7-30V DC电源输入给整个板提供+3.3V和+5V稳压电源.本文介绍了汽车网络开发板主要特性,框图和电路图.

　　The CAN, LIN, CAN-FD Automotive Networking Development Board provides alow-cost modular platform for CAN, LIN, CAN-FD network development using 8-bit,16-bit, and 32-bit Microchip microcontroller families. It features four mikroBUS™headers to accommodate a variety of plug-in Click™ Board combinations for LIN, CAN,and CAN-FD development. The Automotive Networking Development Board supportsCAN and CAN-FD natively. The CAN digital connection from the microcontrollerconnects to the TX/RX connection on the mikroBUS™ header. This connectionsupports the CAN and CAN-FD Transceiver Click™ boards without having to lose themicrocontroller UART connection to the other mikroBUS™ headers.

　　图1.汽车网络开发板外形图

　　The board includes the key features mentioned below, as indicated in the diagram:

　　1.100-pin PIM header, compatible with the PIM versions of selected PIC® MCUand dsPIC® DSC devices

　　2.Direct 7-30V DC power input that provides +3.3V and +5V (regulated) to theentire board

　　3.Power indicator LED will represent what voltage is applied to the processor PIM.

　　4.USB connector for connectivity with MCUs that have a USB module

　　5.Standard 6-wire In-Circuit Debugger (ICD) connector for connections to anMPLAB® ICD programmer/debugger module

　　6.Push button switches for device Reset and user-defined inputs

　　7.Potentiometer for analog input

　　8.Eight indicator LEDs

　　9.Edge connector for PICtail™ Plus card compatibility

　　10.Six-pin interface for the PICkit™ Programmer

　　11.Two Pmod interfaces

　　12.Four mikroBUS™ headers

　　图2.汽车网络开发板正面图

　　详情请见:

20005688A.pdf

40001862A.pdf