0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >工业控制 > ADI DAuM5010隔离DC-DC控制器参考设计方案

ADI DAuM5010隔离DC-DC控制器参考设计方案

来源: 中电网
2019-05-08
类别:工业控制
eye 141
文章创建人 拍明

原标题:ADI DAuM5010隔离DC-DC控制器参考设计方案

  ADI公司的DAuM5010是一款双通道内部集成数字隔离DC-DC转换控制器。基于ADI公司先进iCoupler® 技术,数字隔离DC-DC转换控制器提供隔离调整电压范围:3.15-5.25V,输入电压的范围可以从供给略低于所需的输出来显著提高。本文介绍了DAuM5010芯片的主要特性、方框图、应用方向。评估板EVAL-ADuM5010EBZ的主要特性、电路图、材料清单和PCB元件布局图。

  The ADuM50101 is an integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc., iCoupler® technology, the dc-to-dc converter provides regulated, isolated power, adjustable between 3.15 V and 5.25 V. Input supply voltages can range from slightly below the required output to significantly higher. Popular combinations and their associated power levels are shown in Table 1 .

  The iCoupler chip-scale transformer technology is used for isolated logic signals and for the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation solution.

  isoPower uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the AN-0971 Application Note for board layout recommendations.

  DAuM5010主要特性:

  isoPower integrated, isolated dc-to-dc converter

  Regulated 3.15 V to 5.25 V output

  Up to 150 mW output power

  20-lead SSOP package with 5.3 mm creepage

  High temperature operation: 105°C

  High common-mode transient immunity: >25 kV/μs

  Safety and regulatory approvals

  UL recognition (pending)

  2500 V rms for 1 minute per UL 1577

  CSA Component Acceptance Notice #5A (pending)

  VDE certificate of conformity (pending)

  DIN V VDE V 0884-10 (VDE V 0884-10):2006-12

  VIORM = 560 V peak

  DAuM5010应用:

  Power supply start-up bias and gate drives

  Isolated sensor interfaces

  Industrial PLCs

  图1. DAuM5010方框图

  EVAL-ADuM5010EBZ主要特性:

  isoPower integrated, isolated dc-to-dc converter

  Regulated 3.15 V to 5.25 V output

  Up to 150 mW output power

  20-lead SSOP package with 5.3 mm creepage

  High temperature operation: 105°C

  High common-mode transient immunity: >25 kV/μs

  EVAL-ADuM5010EBZ电路图:

  图2. EVAL-ADuM5010EBZ电路图

  EVAL-ADuM5010EBZ材料清单:

  PCB元件布局图:


责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: ADI 控制器

相关资讯