基于ON NCP1565的100W高效小型化DC-DC Brick通信电源解决方案
原标题:基于ON NCP1565的100W高效小型化DC-DC Brick通信电源解决方案
世平集团推出的1/4 Brick 100W 高效小型化DC-DC模块解决方案,是采用安森美(ON Semi) 半导体新一代高效能BiCMOS制程NCP1565 有源钳位(Active-Clamp) PWM IC. 此一IC 最高操作频率可以达到1.5 MHZ,加上内建120V 高压启动电路,适用于通讯电源Telecom Power 输入48V-72V 的应用。
场景应用图
展示板照片
方案方块图
核心技术优势
1. 支持Voltage Mode 与Peak Current Mode 双模控制
2. 内建可调适Overlap Time 控制,减少交越损失,提高效率
3. 内建120Vdc_in 启动电压电路
4. 可调式低电压磁滞范围(UVLO Hysteresis)保护
5. 基于平均电流的过电流保护机制
6. 内建短路保护
方案规格
1. 可调式Duty Ration clamp , 缓启动Soft-Start , shutdown 及重开机delay 时间
2. 可外部设定操作频率最高1.5MHZ
3. 主回路驱动电流2A Sink/ 3A Source,钳位驱回路电流 2A Sink/ 1A Source
4. 无铅无卤素及符合欧盟有害物质管制标准
技术文档
类别 | 标题 | 档案 |
---|---|---|
硬件 | Power test report | |
硬件 | Gerber | |
硬件 | BOM | |
硬件 | Datasheet |
NCP1565: PWM Controller, Highly Integrated Dual-Mode Active Clamp
The NCP1565 is a highly integrated dual-mode active-clamp PWM controller targeting next-generation high-density, high-performance and small to medium power level isolated dc-dc converters for use in telecom and datacom industries. It can be configured in either voltage mode control with input voltage feed-forward or peak current mode control. Peak current mode control may be implemented with input voltage feed forward as well. Adjustable adaptive overlap time optimizes system efficiency based on input voltage and load conditions. This controller integrates all the necessary control and protection functions to implement an isolated active clamp forward or asymmetric half-bridge converter. It integrates a high-voltage startup bias regulator. The NCP1565 has a line undervoltage detector, cycle-by-cycle current limiting, line voltage dependent maximum duty ratio limit, and programmable overtemperature protection using an external thermistor. It also includes a dual-function FLTSD pin used for communicating the presence of a fault but also for shutting down the controller.
特性
Both Voltage Mode Control and Current Mode Control
Line feedforward
Adaptive Overlap time Control
Integrated 120 V HV Startup
Programmable Line Undervoltage Lockout (UVLO) with Adjustable Hysteresis
Cycle by Cycle Peak Current Limiting
Overcurrent Protection Based on Average Current
Programmable Duty Ratio Clamp
Programmable Soft-Start
Programmable Shutdown and Restart Delays
Programmable External Overtemperature Protection Using Thermistor
FLT/SD pin Used for Fault reporting and Shutdown Input
Programmable Oscillator with 1.5 MHz Maximum Frequency
Main Switch Drive Capability of -2 A/3 A
Active Clamp Switch Drive Capability of -2 A/1 A
Short Circuit Protection
5 V 2% Voltage Reference
VCC Range: from 6.5 V to 20 V
优势
Flexible topology solution
Stable constant crossover across input voltage range
Extended ZVS across input & output operating conditions
Lossless startup and reduced Vcc capacitor via dynamic startup
Safely limits operating input voltage range
Increased converter robustness
Precise output power limit
Efficiently prevents transformer saturation
Lowers components stress at startup
Robustness and flexibility of design
Robustness and flexibility of design
Good system integration
Ready for high frequency designs
Drive larger MOSFETs more efficiently
More efficient drive capability
应用
High Efficiency Isolated dc−dc Converters
Server Power Supplies
24 V and 48 V Telecom systems
42 V Automotive Applications
终端产品
Telecom systems
Servers
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。