基于Renesas公司的RX23T24V马达控制评估系统
原标题:Renesas RX23T24V马达控制评估系统
Renesas公司的RX23T系统是内置浮点处理单元(FPU)的32位RX微控制器(mcu),工作频率40MHz,65.6DMIPS,集成了12位ADC和40MHz PWM,很容易对复杂的逆变器控制算法进行编程,从而大大地降低软件开发的人工成本和维护费用.单电源2.7-V到 5.5-V工作,主要用在通用和消费类电子设备.本文介绍了RX23T系列主要特性,框图和采用RX23T的24V马达控制评估系统主要特性和套件指标,评估系统框图,电路图,材料清单和PCB设计图.
The RX23T Group is 32-bit microcontroller and suited for single inverter control and has a built-in FPU (floating-point processing unit) that enables it to easily program complex inverter control algorithms. This helps to greatly reduce the man-hours required for software development and maintenance. Furthermore, thanks to the RX200 core the current consumed in software standby mode (with RAM retention) is a mere 0.45 μA. RX23T microcontrollers operate in a broad voltage range from 2.7 V to 5.5 V, which is useful for inverter control, and are highly compatible with the RX62T Group at the pin arrangement and software level.
RX23T系列主要特性:
■ 32-bit RX CPU core
Max.operating frequency: 40 MHzCapable of 65.6 DMIPS in operation at 40 MHz
Enhanced DSP: 32-bit multiply-accumulate and 16-bitmultiply-subtract instructions supported
Built-in FPU: 32-bit single-precision floating point(compliant to IEEE754)
Divider (fastest instruction execution takes two CPU clockcycles)
Fast interrupt
CISC Harvard architecture with 5-stage pipeline
Variable-length instructions, ultra-compact code
On-chip debugging circuit
Memory protection unit (MPU) supported
■ Low power design and architecture
Operation from a single 2.7-V to 5.5-V supply
Three low power consumption modes
■ On-chip code flash memory, no wait states
128-/64-Kbyte capacities
On-board or off-board user programming
■ On-chip SRAM, no wait states
12 Kbytes of SRAM
■ DMA
DTC: Four transfer modes
■ Reset and supply management
Seven types of reset, including the power-on reset (POR)
Low voltage detection (LVD) with voltage settings
■ Clock functions
Main clock oscillator frequency: 1 to 20 MHz
External clock input frequency: Up to 20 MHz
PLL circuit input: 4 MHz to 12.5 MHz
On-chip low-speed oscillator, on-chip high-speedoscillator, dedicated on-chip oscillator for the IWDT
Clock frequency accuracy measurement circuit(CAC)
■ Independent watchdog timer
15-kHz on-chip oscillator produces a dedicated clocksignal to drive IWDT operation.
■ Useful functions for IEC60730 compliance
Self-diagnostic and disconnection-detection assistancefunctions for the A/D converter, clock frequency accuracymeasurement circuit, independent watchdog timer, RAMtest assistance functions using the DOC, etc.
■ MPC
Multiple locations are selectable for I/O pins of peripheralFunctions
■ Up to 4 communications channels
SCI with many useful functions (2 channels)Asynchronous mode, clock synchronous mode, smart cardinterface mode, simplified SPI, simplified I2C, andextended serial mode.
I2C bus interface: Transfer at up to 400 kbps (one channel)
RSPI capable of high speed connection (one channel)
■ Up to 12 extended-function timers
16-bit MTU3: 40MHz operation, input capture, outputcompare, three-phase complementary PWM output, CPUefficientcomplementary PWM, phase counting mode (sixchannels)
8-bit TMRs (4 channels),
16-bit compare-match timers (4 channels)
■ 12-bit A/D converter: 10ch
On-chip sample-and-hold circuit: 12bit × up to 3 channels
Sampling time can be set for each channel
Self-diagnostic function and analog input disconnectiondetection assistance function (compliant to IEC60730)
ADC: three sample-and-hold circuits, double dataregisters, comparator (3 channels)
■ Register write protection function can protectvalues in important registers againstoverwriting.
■ Up to 50 pins for general I/O ports
5-V tolerant, open drain, input pull-up
■ Operating temperature range
40 to +85 C
40 to +105 C
RX23T应用:
General industrial and consumer equipment
图1.RX23T系列框图(1)
图2.RX23T系列框图(2)
采用RX23T的24V马达控制评估系统
Due to rising concerns about global warming issues and demands to reduce power costs, power consumption reduction requirements (energy-saving requirements) for electronic equipment and devices are becoming more severe. It is said that power consumption by motors in home appliances makes up over half of the total power consumption of a common household. Thus, it can be said that reducing motor power consumption is the key to saving energy.
There are various methods of controlling a motor. Among them, the best control method for reducing power consumption is inverter control. Although inverter control demonstrates a tremendous ability to achieve energy savings, there are more than a few challenges associated with its implementation. The difficulty of carrying out the inverter control itself, the complicated hardware, and high cost are the typical challenges. Renesas has developed and provides solutions that help overcome such challenges.
The 24V Motor Control Evaluation System for RX23T comes with a low-voltage permanent magnet synchronous motor (24V, 0.42A brushless DC motor) that makes it easy to start evaluating motor control. The preprogrammed sensorless vector control program allows you to run the motor immediately out of the box. You can evaluate different microcontrollers or algorithms by using optional CPU cards or downloading and installing sample code.
The motor control board of the product consists of two parts: an inverter board and a CPU card. Each product version is equipped with a CPU card on which the designated microcontroller model is mounted.
图3.24V马达控制评估系统外形图
24V马达控制评估系统主要特性:
1. Supports the RX23T motor control microcontroller.
2. Supports permanent magnet synchronous motors.
3. Supports three-shunt current detection.
4. Equipped with USB mini-B connector for Motor RSSK Support Tool communication.
5. Overcurrent protection function using overcurrent detection circuit.
采用RX23T的24V马达控制评估系统指标(1):套件板指标
采用RX23T的24V马达控制评估系统指标(2):24V逆变器板指标
采用RX23T的24V马达控制评估系统指标(3):RX23T CPU卡指标
图4.24V马达控制评估系统框图
图5.马达控制评估系统框图
24V马达控制评估系统材料清单(BOM):
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。