基于TI公司TPS546C23带PMBus35A DC-DC转换器解决方案
原标题:TI TPS546C23带PMBus35A DC-DC转换器解决方案
TI公司的TPS546C23是PMBus 1.3兼容的非绝缘集成了FET的DC/DC转换器,具有高频工作和输出电流35A,5-mm × 7-mmLQFN封装.两个TPS546C23并联可提供70A电流.输入电压4.5V-18V,输出电压0.35V-5.5V,主要用在测试和仪表,以太网交换机,光交换机,路由器和基站,服务器,企业存储SSD和高密度电源解决方案.本文介绍了TPS546C23主要特性,功能框图,多种应用电路,以及两相70A带PMBus评估模块TPS546C23EVM2-746主要特性和电性能指标,电路图,材料清单和PCB设计图.
The TPS546C23 devices are PMBus 1.3 Compliant, non-isolated DC-DC converters with integrated FETs, capable of high-frequency operation and 35-A current output from a 5-mm × 7-mm package. Two TPS546C23 devices can be paralleled together to provide up to 70-A load. Current sensing is realized by sampling a small portion of the power stage current and independent on the device temperature. High-frequency, low-loss switching, provided by an integrated NexFET power stage and optimized drivers, allows for very high-density power solutions. The PMBus interface enables the AVS functions through VOUT_COMMAND, flexible converter configuration, as well as key parameters monitoring including output voltage, current, and internal die temperature. Response to fault conditions can be set to either restart, latch-off or ignore depending on system requirements.
TPS546C23主要特性:
PMBus™ 1.3 Compliant Converters: 35 A
2-Device Stackable for up to 70 A With Current Sharing
Input Voltage Range: 4.5 V to 18 V
Output Voltage Range: 0.35 V to 5.5 V
5 mm × 7 mm LQFN Package
Single Thermal Pad
Integrated 3.2-mΩ and 1.4-mΩ Stacked NexFET™ Power Stage
350-mV to 1650-mV Reference for Adaptive Voltage Scaling (AVS) Function and Margining through PMBus
0.5% Reference Accuracy at 600 mV and Above
Lossless Low-Side MOSFET Current Sensing
Voltage Mode Control With Input Feed-Forward
Differential Remote Sensing
Monotonic Start-Up into Pre-Biased Output
Output Voltage and Output Current Reporting
Internal Die Temperature Monitoring
64 Programmable PMBus Addresses via ADDR0 and ADDR1 Pins
Programmable via the PMBus Interface
VOUT_COMMAND and AVS VOUT Transition Rate
Overcurrent Protection With Thermal Compensation
UVLO, Soft-Start and Soft-Stop
PGOOD, OV, UV, OT Levels
Fault Responses
Turn-On and Turn-Off Delays
Thermal Shutdown
Pin Strapping for Switching Frequency: 200 kHz to 1 MHz
Frequency Synchronization to an External Clock or Output Clock to Sync Out
TPS546C23应用:
• Test and Instrumentation
• Ethernet Switches, Optical Switches, Routers,Base Stations
• Servers
• Enterprise Storage SSD
• High-Density Power Solutions
图1.TPS546C23功能框图
图2.TPS546C23两相应用电图
图3.TPS546C23用电路图:4.5V-18V输入,1V/35A输出转换器
两相70A带PMBus评估模块TPS546C23EVM2-746
The TPS546C23EVM2-746 evaluation module (EVM) is a two phase buck converter with two TPS546C23devices. The TPS546C23 device is a stackable synchronous buck with PMBus interface that can operatefrom a nominal 4.5-V to 18-V supply. The device allows programming and monitoring via the PMBusinterface.
Two TPS546C23 devices are configured as two phase buck converter in factory default, output current isevenly distributed in the two devices; both the negative and positive output terminals are connectedtogether.
评估模块TPS546C23EVM2-746主要特性:
• Regulated 1.2-V output up to 70-A DC steady-state output current
• The output voltage is marginable and trimmable via the PMBus interface
– Programmable UVLO, soft-start, and enable via the PMBus interface
– Programmable overcurrent warning and fault limits and programmable response to faults via thePMBus interface
– Programmable overvoltage and undervoltage warning and fault limits and programmable response
to faults via the PMBus interface
– Programmable turn-on and turn-off delays
• Convenient test points for probing critical waveforms
评估模块TPS546C23EVM2-746典型应用:
• High-density power solutions
• Wireless infrastructure
• Switcher
• Router Network
• Server
• Storage
• Smart power systems
图4.评估模块TPS546C23EVM2-746外形和测试图
评估模块TPS546C23EVM2-746电性能指标:
评估模块TPS546C23EVM2-746材料清单:
详情请见:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。