基于Allegro MicroSystems公司的A5950直流马达驱动方案
原标题:Allegro MicroSystems A5950直流马达驱动方案
Allegro MicroSystems公司的A5950是脉宽调制(PWM)控制的直流马达驱动器,峰值电流高达±3 A,工作电压高达40V,内部保护电路包括过流保护,马达线对地或对电源保护,带滞后的热关断,VBB欠压监视和过流保护,故障输出.本文介绍了A5950主要特性和优势,功能框图以及A5950EU(QFN封装)演示板和A5950LP(eTSSOP封装)演示板的电路图,材料清单和PCB设计图.
Designed for pulse-width-modulated (PWM) control of DCmotors, the A5950 is capable of peak output currents up to±3 A and operating voltages up to 40 V.
Input terminals are provided for use in controlling the speed anddirection of a DC motor with externally applied PWM controlsignals. Internal synchronous rectification control circuitry isprovided to lower power dissipation during PWM operation.
Internal circuit protection includes overcurrent protection,motor lead short to ground or supply, thermal shutdown withhysteresis, undervoltage monitoring of VBB, and crossovercurrentprotection.
The A5950 is supplied in a low-profile 4 mm×4 mm 16-contactQFN (suffix “EU”) package with wettable flank option (suffix“-P”),or a 16-lead eTSSOP (suffix “LP”),all three with exposedpower tab for enhanced thermal performance.
A5950主要特性和优势:
• Overcurrent protection (OCP)
• Motor lead short-to-ground protection
• Motor lead short-to-battery protection
• Motor short protection
• Low-power standby mode
• Fault output
• Adjustable current limit option
• Current-to-voltage output
• Synchronous rectification – high-side
• Internal UVLO
• Crossover-current protection
• Thermal warning and shutdown function
• AEC-Q100 Grade 1 qualified – K version
图1.A5950功能框图
图2.A5950EU(QFN封装)演示板电路图
A5950EU(QFN封装)演示板材料清单:
A5950LP(eTSSOP封装)演示板材料清单:
详情请见:
A5950EU-Demo-Board-Schematic.pdf
A5950LP-Demo-Board-Schematic.pdf
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。