基于Maxim公司的MAX14827A低功耗超小型IO-Link收发器解决方案
原标题:Maxim MAX14827A低功耗超小型IO-Link收发器解决方案
Maxim公司的MAX14827A是低功耗超小型双驱动IO-Link收发器,工作电压从通常的24V到高达60V,具有灵活控制接口,引脚控制逻辑输入允许开关传感器不需要微控制器(MCU),集成了3.3V和5V线性稳压器,主要用在工业传感器,IO-Link传感器和激励器以及安全应用.本文介绍了MAX14827A主要优势和特性,框图,典型应用电路图以及MAX14827评估板EVK主要特性,电路图,材料清单和PCB设计图.
The MAX14827A integrates the high-voltage functionscommonly found in industrial sensors, including driversand regulators. The MAX14827A features two ultra lowpowerdrivers with active reverse-polarity protection.
Operation is specified for normal 24V supply voltagesup to 60V. Transient protection is simplified due to highvoltage tolerance allowing the use of micro TVS.
The device features a flexible control interface. Pincontrollogic inputs allow for operation with switchingsensors that do not use a microcontroller. For sensors thatuse a microcontroller, an SPI interface is available withextensive diagnostics. For IO-Link operation, a three-wireUART interface is provided, allowing interfacing to themicrocontroller UART. Finally, a multiplexed UART/SPIoption allows using one serial microcontroller interface forshared SPI and UART interfaces.
The device includes on-board 3.3V and 5V linearregulators for low-noise analog/logic supply rails.
The MAX14827A is available in a (4mm x 4mm) 24-pinTQFN package and a (2.5mm x 2.5mm) 25-pin waferlevelpackage (WLP) and is specified over the extended-40℃ to +125℃ temperature range.
MAX14827A主要优势和特性:
●● Low Power Dissipation for Small Sensors
• 2.3Ω/2.7Ω (typ) Driver On-Resistance
• 70mW (typ) Power Dissipation at 100mA (WhenBoth C/Q and DO Drivers Are Driving)
●● High Configurability and Integration Reduce SKUs
• Auxiliary 24V Digital Output and Input
• Selectable Driver Current: 50mA to 250mA
• SPI/Pin-Control Interface for Configuration andMonitoring
• Multiplexed SPI/UART Interface Option
• 5V and 3.3V Linear Regulators
• Optional External Transistor Supports HigherRegulator Load Capability
• Integrated LED Driver
●● Selectable Driver Integrated Protection EnablesRobust Communication
• 65V Absolute Maximum Ratings on Interface andSupply Pins Allows for Flexible TVS Protection
• 9V to 60V Specified Operation
• Glitch Filters for Improved Burst Resilience andNoise
• Thermal Shutdown Auto-Retry Cycling
• Hot-Plug Supply Protection
• Reverse Polarity Protection of All Sensor InterfaceInputs/Outputs
• -40 ℃ to +125 ℃ Operating Temperature Range
MAX14827A应用:
●● Industrial sensors
●● IO-Link sensors and actuators
●● Safety applications
MAX14827评估板EVK
The MAX14827 evaluation kit (EV kit) consists of aMAX14827 evaluation board is a fully assembled and testedcircuit board that evaluates the MAX14827 IO-Link®device transceiver.
The EV kit is designed to operate as a stand-alone boardor with an mbed® board for easy software evaluation.The MAX14827 EV kit can also be used to evaluate theMAX14827A.
图3.MAX14827评估板EVK外形图
MAX14827评估板EVK主要特性:
●● IO-Link-Compliant Device Transceiver
●● IO and SPI Interface Terminals
●● Proven PCB Layout
●● Fully Assembled and Tested
MAX14827评估板EVK材料清单:
Maxim MAX14827A IO-Link 器件收发器整合了工业传感器(包括驱动器和调节器)中常见的高电压功能。 MAX14827A 配有两个带主动反极性保护的超低功耗驱动器。 该操作规定为 24V 额定电源电压,最高达 60V。由于高电压容限允许使用微型 TVS,从而简化了瞬变保护。 该器件具有一个柔性控制接口。 引脚控制逻辑输入允许采用不使用微控制器的开关传感器进行操作。 对于使用微控制器的传感器,可使用一个带多种诊断功能的 SPI 接口。 对于 IO-Link 操作,提供一个三线 UART 接口。 该接口可连接到微控制器 UART。 最后,多路复用器 UART/SPI 选项允许使用一个串行微控制器接口共享 SPI 和 UART 接口。
5px">特性
低功率耗散,用于小尺寸传感器
2.3Ω/2.7Ω(典型值)驱动器导通电阻
在 100mA 时的功率耗散为 70mW (典型值)(正在驱动 C/Q 和 DO 驱动器时)
可配置性和集成度高,减少了 SKU
24V 辅助数字输出和输入
可选择驱动器电流:50mA-250mA
SPI/引脚控制接口,用于配制和监控
多复用器 SPI/UART 接口选择
5V 和 3.3V 线性稳压器
可选外部晶体管支持更高的稳压器负载能力
集成 LED 驱动器
可选择的驱动器集成式保护实现稳健的通信
接口和电源引脚的绝对最大额定值为 65V,因此可实现灵活的 TVS 保护
9V-60V 指定工作电压
突波滤波器可改进突波复原和噪声
热关断自动重试周期
热插拔电源保护
全部传感器接口输入/输出的反极性保护
工作温度范围:-40°C 至 +125°C
应用
工业传感器
IO-Link 传感器和执行器
安全应用
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。