原标题：Cypress PSoC 63系列BLE 5.0兼容无线连接解决方案

　　Cypress公司的PSoC 63系列是集成了ARM®Cortex™ CPU的可升级和可配置的嵌入系统控制器,采用超低功耗40nm技术,组合了双核微控制器,低功耗闪存,数字可编逻辑以及高性能模数和数模转换器,低功耗比较器,标准通信和定时外设,可以提供和BLE 5.0兼容的无线连接,主要用在物联网(IoT)领域.本文介绍了PSoC 63系列主要特性,系列框图以及PSoC® 6 BLE Pioneer套件主要特性,PSoC® 6 BLE Pioneer板框图,电路图,材料清单和PCB设计图.

　　PSoC® is a scalable and reconfigurable platform architecture for a family of programmable embedded system controllers with ARM®Cortex™ CPUs (single and multi-core). The PSoC 63 product family, based on an ultra low-power 40-nm platform, is a combinationof a dual-core microcontroller with low-power Flash technology and digital programmable logic, high-performance analog-to-digitaland digital-to-analog conversion, low-power comparators, and standard communication and timing peripherals. The PSoC 63 familyprovides wireless connectivity with BLE 5.0 compliance.

　　PSoC 63系列主要特性:

　　32-bit Dual Core CPU Subsystem

　　■ 150-MHz ARM Cortex-M4F CPU with single-cycle multiply(Floating Point and Memory Protection Unit)

　　■ 100-MHz Cortex M0+ CPU

　　■ User-selectable core logic operation at either 1.1 V or 0.9 V

　　■ Inter-processor communication supported in hardware

　　■ 8 KB 4-way set-associative Instruction Caches for the M4 andM0+ CPUs respectively

　　■ Active CPU power consumption slope with 1.1-V core operationfor the Cortex M4 is 40 μA/MHz and 20 μA/MHz for the CortexM0+, both at 3.3-V chip supply voltage with the internal buckregulator

　　■ Active CPU power consumption slope with 0.9-V core operationfor the Cortex M4 is 26 μA/MHz and 17 μA/MHz for the CortexM0+, both at 3.3-V chip supply voltage with the internal buckregulator

　　■ Two DMA controllers with 16 channels each

　　Flash Memory Sub-system

　　■ 1 MB Application Flash with 32-KB EEPROM area and 32-KBSecure Flash

　　■ 128-bit wide Flash accesses reduce power

　　■ Flash Read-While-Write (RWW) allows updating the Flashwhile executing from it

　　■ SRAM with Selectable Retention Granularity

　　■ 288-KB integrated SRAM

　　■ 32-KB retention boundaries (can retain 32K to 288K in 32Kincrements)

　　■ One-Time-Programmable (OTP) E-Fuse memory for validationand security

　　Bluetooth Low Energy (Bluetooth Smart) BT 4.2Subsystem

　　■ 2.4-GHz RF transceiver with 50- antenna drive

　　■ Digital PHY

　　■ Link Layer engine supporting master and slave modes

　　■ Programmable output power: up to 4 dBm

　　■ RX sensitivity: –95 dBm

　　■ RSSI: 1-dB resolution

　　■ 4.2 mA TX (0 dBm) and 4.4 mA RX (2 Mbps) current with 3.3-Vbattery and internal SIMO Buck converter

　　■ Link Layer engine supports four connections simultaneously

　　■ Supports 2 Mbps LE data rate

　　Low-Power 1.7-V to 3.6-V Operation

　　■ Active, Low-power Active, Sleep, Low-power Sleep, DeepSleep, and Hibernate modes for fine-grained powermanagement

　　■ Deep Sleep mode current with 64K SRAM retention is 7 μAwith 3.3-V external supply and internal buck

　　■ On-chip Single-In Multiple Out (SIMO) DC-DC Buck converter,<1 μA quiescent current

　　■ Backup domain with 64 bytes of memory and Real-Time-Clock

　　Flexible Clocking Options

　　■ On-chip crystal oscillators (High-speed, 4 to 33 MHz, andWatch crystal, 32 kHz)

　　■ Phase Locked Loop (PLL) for multiplying clock frequencies

　　■ 8 MHz Internal Main Oscillator (IMO) with 1% accuracy

　　■ Ultra low-power 32 kHz Internal Low-speed Oscillator (ILO)with ±10% accuracy

　　■ IMO can be locked to 32 kHz WCO input for better accuracy

　　■ frequency Locked Loop (FLL) for multiplying IMO frequency

　　Serial Communication

　　■ Nine independent run-time reconfigurable serial communicationblocks (SCBs), each is software configurable as I2C,SPI, or UART

　　Timing and Pulse-Width Modulation

　　■ Thirty-two 16-bit Timer/Counter Pulse-Width Modulator(TCPWM) blocks

　　■ Center-aligned, Edge, and Pseudo-random modes

　　■ Comparator-based triggering of Kill signals

　　Up to 78 Programmable GPIOs

　　■ Drive modes, strengths, and slew rates are programmable

　　■ Six overvoltage tolerant (OVT) pins

　　Packages

　　■ 116-BGA and 104-MCSP packages with PSoC 6 and BLERadio

　　Audio Subsystem

　　■ I2S Interface; up to 192 kilosamples (ksps) Word Clock

　　■ Two PDM channels for stereo digital microphones

　　QSPI Interface

　　■ Execute-In-Place (XIP) from external Quad SPI Flash

　　■ On-the-fly encryption and decryption

　　■ 4 KB QSPI cache for greater XIP performance with lower power

　　■ Supports 1, 2, 4, and Dual-Quad interfaces

　　Programmable Analog

　　■ 12-bit 1 Msps SAR ADC with differential and single-endedmodes and 16-Channel Sequencer with signal averaging

　　■ One 12-bit voltage mode DAC with < 5-μs settling time

　　■ Twoopamps with low-power operation modes

　　■ Two low-power comparators that operate in Deep Sleep andHibernate modes.

　　■ Built-in temp sensor connected to ADC

　　Programmable Digital

　　■ 12 programmable logic blocks, each with 8 Macrocells and an8-bit data path (called universal digital blocks or UDBs)

　　■ Usable as drag-and-drop Boolean primitives (gates, registers),or as Verilog programmable blocks

　　■ Cypress-provided peripheral component library using UDBs toimplement functions such as Communication peripherals (forexample, LIN, UART, SPI, I2C, S/PDIF and other protocols),Waveform Generators, Pseudo-Random Sequence (PRS)generation, and many other functions.

　　■ Smart I/O (Programmable I/O) blocks enable Booleanoperations on signals coming from, and going to, GPIO pins

　　■ Two ports with Smart_IO blocks, capability are provided; theseare available during Deep Sleep

　　Capacitive Sensing

　　■ Cypress Capacitive Sigma-Delta (CSD) provides best-in-classSNR, liquid tolerance, and proximity sensing

　　■ Mutual Capacitance sensing (Cypress CSX) with dynamicusage of both Self and Mutual sensing

　　■ Wake on Touch with very low current

　　■ Cypress-supplied software component makes capacitivesensing design fast and easy

　　■ Automatic hardware tuning (SmartSense™)

　　Energy Profiler

　　■ Block that provides history of time spent in different powermodes

　　■ Allows software energy profiling to observe and optimizeenergy consumption

　　PSoC Creator Design Environment

　　■ Integrated Development Environment provides schematicdesign entry and build (with analog and digital automaticrouting) and code development and debugging

　　■ Applications Programming Interface (API Component) for allfixed-function and programmable peripherals

　　■ Bluetooth Smart Component (BLE4.2 compliant protocol stack)with Application level function calls and Profiles

　　Industry-Standard Tool Compatibility

　　■ After schematic entry, development can be done withARM-based industry-standard development tools

　　■ Configure in PSoC Creator and export to ARM/Keil or IAR IDEsfor code development and debugging

　　■ Supports industry standard ARM Trace Emulation TraceModule

　　Security Built into Platform Architecture

　　■ Multi-faceted secure architecture based on ROM-based root oftrust

　　■ Secure Boot uninterruptible until system protection attributesare established

　　■ Authentication during boot using hardware hashing

　　■ Step-wise authentication of execution images

　　■ Secure execution of code in execute-only mode for protectedroutines

　　■ All Debug and Test ingress paths can be disabled

　　Cryptography Accelerators

　　■ Hardware acceleration for Symmetric and Asymmetriccryptographic methods (AES, 3DES, RSA, and ECC) and Hashfunctions (SHA-512, SHA-256)

　　■ True Random Number Generator (TRNG) function

　　图1.PSoC 63系列框图

　　PSoC® 6 BLE Pioneer套件

　　Thank you for your interest in the CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit. The PSoC 6 BLEPioneer Kit enables you to evaluate and develop your applications using the PSoC 6 MCU withBluetooth Low Energy (BLE) Connectivity (hereafter called “PSoC 6 MCU”).PSoC 6 MCU is Cypress’ latest, ultra-low-power PSoC specifically designed for wearables and IoTproducts. PSoC 6 MCU is a true programmable embedded system-on-chip, integrating a 150-MHzARM® Cortex®-M4 as the primary application processor, a 100-MHz ARM Cortex®-M0+ thatsupports low-power operations, up to 1 MB Flash and 288 KB SRAM, an integrated BLE 4.2 radio,CapSense® touch-sensing, and programmable analog and digital peripherals that allow higherflexibility, in-field tuning of the design, and faster time-to-market.

　　The PSoC 6 BLE Pioneer board offers compatibility with Arduino™ shields. The board features aPSoC 6 MCU, a 512-Mb NOR flash, onboard programmer/debugger (KitProg2), USB Type-C powerdelivery system (EZ-PD™ CCG3), 5-segment CapSense slider, two CapSense buttons, one Cap-Sense proximity sensing header, an RGB LED, two user LEDs, and one push button. The boardsupports operating voltages from 1.8 V to 3.3 V for PSoC 6 MCU.

　　The CY8CKIT-062-BLE package includes a CY8CKIT-028-EPD E-INK Display Shield that containsa 2.7-inch E-INK display, a motion sensor, a thermistor, and a PDM microphone. The kit packagealso contains a CY5677 CySmart BLE 4.2 USB Dongle that is factory-programmed to emulate a BLEGAP Central device, enabling you to emulate a BLE host on your computer.

　　You can use PSoC Creator™ to develop and debug your PSoC 6 MCU projects. PSoCCreator isCypress’ standard integrated design environment (IDE). PSoC Creator also supports exporting yourdesigns to other third party firmware development tools.

　　PSoC® 6 BLE Pioneer套件包括:

　　The CY8CKIT-062-BLE package has the following contents.

　　■ PSoC 6 BLE Pioneer Board

　　■ CY8CKIT-028-EPD E-INK Display Shield

　　■ CY5677 CySmart BLE 4.2 USB Dongle

　　■ USB Type-A to Type-C cable

　　■ Four jumper wires (4 inches each)

　　■ Two proximity sensor wires (5 inches each)

　　■ Quick Start Guide

　　Pioneer board that has the following features:

　　■ PSoC 6 MCU with BLE connectivity

　　■ Expansion headers that are compatible with Arduino Uno™ 3.3 V shields1 and Digilent® Pmod™modules

　　■ 512-Mbit external quad-SPI NOR Flash that provides a fast, expandable memory for data andcode

　　■ KitProg2 onboard programmer/debugger with mass storage programming, USB to UART/I2C/SPI bridge functionality, and custom applications support

　　■ EZ-PD CCG3 USB Type-C power delivery (PD) system with rechargeable lithium-ion polymer (Li-Po) battery support2

　　■ CapSense touch-sensing slider (5 elements), two buttons, all of which are capable of both selfcapacitance(CSD) and mutual-capacitance (CSX) operation, and a CSD proximity sensor that letyou evaluate Cypress’ fourth-generation CapSense technology

　　■ 1.8 V to 3.3 V operation of PSoC 6 MCU is supported. An additional 330 mF super-capacitor isprovided for backup domain supply (Vbackup)

　　■ Two user LEDs, an RGB LED, a user button, and a reset button for PSoC 6 MCU. Two buttonsand three LEDs for KitProg2

　　图2.PSoC® 6 BLE Pioneer套件外形图

　　图3.PSoC 6 BLE Pioneer板外形图

　　PSoC 6 BLE Pioneer板材料清单见:

PSoC_6_MCU_PSoC_63_with_BLE.pdf.pdf

CY8CKIT-062-BLE_Kit_Guide.pdf.pdf

CY8CKIT-062-BLE.zip.zip