0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >LED应用 > NXP PCF8576C多路传输通用LCD驱动方案

NXP PCF8576C多路传输通用LCD驱动方案

来源: eccn
2020-03-18
类别:LED应用
eye 129
文章创建人 拍明

原标题:NXP PCF8576C多路传输通用LCD驱动方案

  nxp 公司的PCF8534A是多路传输低速率通用LCD驱动器,能驱动多达4块背板和多达40段的LCD,并很容易级联以驱动更大LCD显示屏.具有多种闪光模式,通过双向I2C总线和大多数的微处理器或微控制器兼容,不需要外接元件.本文介绍了PCF8576C的主要特性,级联PCF8576C系统配置框图以及单面配线框图.

  PCF8576C:Universal LCD driver for low multiplex rates

  The PCF8576C is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 40 segments and can easily be cascaded for larger LCD applications. The PCF8576C is compatible with most microprocessors or microcontrollers and communicates via a two-line bidirectional I2C-bus. Communication overheads are minimized by a display RAM with auto-incremented addressing, by hardware subaddressing.

  PCF8576C主要特性:

  Single-chip LCD controller and driver

  40 segment drives:

  Up to twenty 7-segment numeric characters

  Up to ten 14-segment alphanumeric characters

  Any graphics of up to 160 elements

  Versatile blinking modes

  No external components required (even in multiple device applications)

  Selectable backplane drive configuration: static or 2, 3, 4 backplane multiplexing

  Selectable display bias configuration: static, 12 or 13

  Internal LCD bias generation with voltage-follower buffers

  40.4-bit RAM for display data storage

  Auto-incremented display data loading across device subaddress boundaries

  Display memory bank switching in static and duplex drive modes

  Wide logic LCD supply range:

  From 2 V for low-threshold LCDs

  Up to 6 V for guest-host LCDs and high-threshold twisted nematic LCDs

  Low power consumption

  May be cascaded for large LCD applications (up to 2560 segments possible)

  Cascadable with 24-segment LCD driver PCF8566

  No external components

  Compatible with chip-on-glass technology

  Separate or combined LCD and logic supplies

  Optimized pinning for plane wiring in both and multiple PCF8576C applications

  Power-saving mode for extremely low power consumption in battery-operated and telephone applications

  

  图1.PCF8576C方框图

  

  图2.级联PCF8576C系统配置图

  

  图3. PCF8576CT单面配线框图



责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案