原标题：ST STSPIN32F0251系统级封装250V三相栅极驱动方案

　　ST公司的250V stspin32F0251和STSPIN32F0252以及600V STSPIN32F0601 和STSPIN32F0602是系统级封装,把三相栅极栅极驱动器和STM32F0 Arm® Cortex®-M0 微控制器集成在一起,从而简化高压无刷DC(BLDC)马达驱动器设计,降低PCB面积和整个系统的材料清单(BOM).STSPIN32F0251具有200/350 mA源/沉电流,而STSPIN32F0252具有1/0.85 A 源/沉电流, dV/dt 瞬变免疫为±50 V/ns,栅极驱动电压从9V到20V. 32位 ARM® Cortex®-M0核时钟高达48MHz,具有4KB SRAM和32KB闪存,21个通用I/O端口(GPIO),6个通用计时器和高达10路12位ADC.器件具有I2C, USART和SPI接口.具有智能关断(smartSD)功能.扩展工作温度-40 到+125℃ .主要用在工业风扇和泵,家用电器,工业和家庭自动化,电池供电和110Vac电动与花园工具.中电网为您整理如下详细资料,本文介绍了STSPIN32F0251主要特性,STSPIN32F025x系列SiP框图以及评估板EVSPIN32F0251S1主要特性,主要元件和连接器位置图,电路图和材料清单.

　　The 250V STSPIN32F0251 and STSPIN32F0252, and 600V STSPIN32F0601 and STSPIN32F0602 combine three-phase gate drivers and an STM32F0 Arm® Cortex®-M0 microcontroller to simplify high-voltage Brushless DC (BLDC) motor drives.

　　The STSPIN32F025x system-in-package is an extremely integrated solution for driving three phase applications, helping designers to reduce PCB area and overall bill-of-material.

　　It embeds an STM32F031x6x7 featuring an ARM® 32-bit Cortex®-M0 CPU and a 250 V triple half-bridge gate driver, able to drive N-channel power MOSFETs or IGBTs.A comparator featuring advanced smartSD function is integrated, ensuring fast and effective protection against overload and overcurrent.

　　The high-voltage bootstrap diodes are also integrated, as well as anti cross-conduction,

　　deadtime and UVLO protection on both the lower and upper driving sections, which prevents the power switches from operating in low efficiency or dangerous conditions. Matched delays between low and high-side sections guarantee no cycle distortion.

　　The integrated MCU allows performing FOC, 6-step sensorless and other advanced driving algorithms including the speed control loop.

　　STSPIN32F0251主要特性:

　　 Three-phase gate drivers

　　– High voltage rail up to 250 V

　　– Driver current capability:

　　STSPIN32F0251:

　　200/350 mA source/sink current

　　STSPIN32F0252:

　　1/0.85 A source/sink current

　　– dV/dt transient immunity ±50 V/ns

　　– Gate driving voltage range from 9V to 20V

　　 32-bit ARM® Cortex®-M0 core:

　　– Up to 48 MHz clock frequency

　　– 4-Kbyte SRAM with HW parity

　　– 32-Kbyte Flash memory with option bytes used for write/readout protection

　　 21 general-purpose I/O ports (GPIO)

　　 6 general-purpose timers

　　 12-bit ADC converter (up to 10 channels)

　　 I2C, USART and SPI interfaces

　　 Matched propagation delay for all channels

　　 Integrated bootstrap diodes

　　 Comparator for fast over current protection

　　 UVLO, Interlocking and deadtime functions

　　 Smart shutdown (smartSD) function

　　 Standby mode for low power consumption

　　 On-chip debug support via SWD

　　 Extended temperature range: -40 to +125℃

　　STSPIN32F0251应用:

　　 Battery operated and 110 Vac supplied power and garden tools

　　 Industrial fans and pumps

　　 Home appliances

　　 Industrial and home automation

　　图1.STSPIN32F025x系列SiP框图

　　评估板EVSPIN32F0251S1: 3-phase inverter based on STSPIN32F0251

　　The EVSPIN32F0251S1 board is a 3-phase complete inverter based on the STSPIN32F0251 controller, which embeds a 3‑phase 250 V gate driver and a Cortex®‑M0 STM32 MCU. The power stage features STD17NF25 MOS, but can be populated with any IGBT or Power MOSFET in DPAK or powerFLAT 6x5 HV package.

　　The board has a single-shunt sensing topology, and both the field-oriented control (FOC) and sensored or sensorless 6‑step control can be implemented. This allows driving permanent magnet synchronous motors (PMSMs) and brushless DC (BLDC) motors.It provides an easy-to-use solution for the evaluation of the device in different applications such as battery operated tools, industrial pumps, fans and home appliances.

　　The evaluation board is compatible with a wide range of input voltage and includes a power supply stage with the VIPER013BLS in buck configuration to generate +15 V and +3.3 V supply voltages required by the application.

　　Debug and configuration of FW can be performed with standard STM32 tools through the detachable ST-LINK debugger. SWD and UART TX RX connectors are also available.

　　图2.评估板EVSPIN32F0251S1外形图

　　评估板EVSPIN32F0251S1主要特性:

　　• Input voltage from 15 VAC (20 VDC) to 120 VAC (170 VDC)

　　• High voltage rail up to 250 V

　　• STD17NF25 MOSFETs power stage featuring:

　　– VDS = 250 V

　　– RDS(on) max.= 0.165 Ω

　　• Dual footprint for IGBT/MOSFET packages

　　– DPAK

　　– PowerFlat 6x5

　　• Single-shunt current sensing, suitable for:

　　– Sensored or sensorless 6 steps algorithm

　　– Single-shunt vector (FOC) algorithm

　　• Digital Hall sensors and encoder input

　　• Smart shutdown Overcurrent protection

　　• Bus voltage sensing

　　• 15 V VCC and 3.3 V VDD supplies

　　• Embedded ST-LINK/V2-1

　　• Easy user interface with buttons and trimmer

　　• RoHS compliant

　　评估板EVSPIN32F0251S1目标应用:

　　• Battery operated and 110 Vac supplied power and garden tools

　　• Industrial fans and pumps

　　• Home appliances

　　• Industrial and home automation

　　评估板EVSPIN32F0251S1材料清单: