Qualcomm-Atheros AR1021 Wi-Fi模块方案
系统介绍
AR1021为2*2 单芯片解决方案,内部集成了CPU/MAC/BB/RF (PA, LNA, SWITCH),外围精简,无需额外的存储芯片。
系统特性
支持USB, SDIO, MII, RMII, RGMII接口
内嵌MCU, 减轻系统处理器的负载
外围接口丰富,支持SPI, HS-UART, UART, JTAG, GPIOS, I2S, I2C, SPDIF
AR1021
Not Recommended for new designs
The Microchip mTouch™ AR1000 Series Resistive Touch Screen Controller is a complete, easy to integrate, cost-effective and universal touch screen controller chip solution. The AR1000 Series has sophisticated proprietary touch screen decoding algorithms to fully process all touch data and save the host from this overhead. More than the usual “preprocessing” features of other low cost devices, the AR1000 delivers reliable, validated and calibrated touch coordinates. Using its onboard EEPROM, the AR1000 can store and independently apply the calibration to the touch coordinates before sending them to the host. This unique combination makes the AR1000 the most resource efficient touch screen controller for embedded designs.
The AR1021 touch screen controller supports I2C™Compatible and SPI communication. Please reference the AR1011 touch screen controller for UART communication.
Features
Supports any manufacturer's 4-, 5-, or 8-wire analog resistive touch screen
I2C or SPI communication
1024x1024 resolution
EEPROM calibration retention
Supports any size analog resistive touch screen, 1.5" - 24"
Parameter Name:Value
Product Type:Analog Resistive Controller
Measurement Principle:Resistance
Report Rate (pps):140
Number of Touches:1
Power:3.3Vdc ±5%,5.5Vdc ±5%
Power Modes:2
Position Resolution:1024x1024
Interface:I2C, SPI
Features:4, 5, & 8 wire support
Voltage Range:2.5V - 5.5V
责任编辑:Davia
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。