Maxim MAX9830 2W单声道D类放大方案
原标题:Maxim MAX9830 2W单声道D类放大方案
Maxim公司的MAX9830是2W单声道D类放大器,提供AB类放大器的音频性能和D类放大器的效率. 5V时的静态电流1.6mA, 3.6V时的静态电流1.2mA,关断模式电流为0.5uA,专利的无滤波器的广谱调制方案不需要通常D类放大器的输出滤波器,从而降低了外接元件.主要用在笔记本和上网本电脑,手机,MP3播放器,手提音频播放器和VoIP电话.本文介绍了MAX9830主要特性,方框图以及MAX9830A评估板主要特性,电路图和元件列表.
The MAX9830 mono 2W Class D amplifier provides Class AB audio performance with Class D efficiency. Active emissions limiting edge rate and overshoot control circuitry greatly reduces EMI. A patented filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices. These features reduce application component count.
The MAX9830’s industry-leading 1.6mA at 5V, 1.2mA at 3.6V, quiescent current extends battery life in portable applications.
The MAX9830 is available in an 8-pin TDFN (2mm x 2mm x 0.8mm) and is specified over the extended -40℃ to +85℃ temperature range.
MAX9830主要特性:
_ Industry-Leading Quiescent Current: 1.6mA at 5V, 1.2mA at 3.6V
_ Spread Spectrum and Active Emissions Limiting
_ Passes EMI Limit Unfiltered with Up to 24in (61cm) of Speaker Cable
_ Click-and-Pop Suppression
_ Thermal and Overcurrent Protection
_ Low 0.5μA Current Shutdown Mode
_ Space-Saving, 2mm x 2mm x 0.8mm, 8-Pin TDFN Package
MAX9830应用:
Notebook and Netbook Computers
Cellular Phones
MP3 Players
Portable Audio Players
VoIP Phones
图1.MAX9830功能方框图
MAX9830A评估板
The MAX9830A evaluation kit (EV kit) is a fully assembled and tested circuit board that uses the MAX9830A filterless Class D amplifier to drive a mono bridge-tied-load (BTL) speaker in portable audio applications. Designed to operate from a 2.6V to 5.5V DC power supply, the EV kit is capable of delivering 2W into a 4I load. The EV kit accepts differential or single-ended input signals.
The MAX9830A EV kit also evaluates the MAX9830B–MAX9830E.
MAX9830A评估板主要特性:
Industry-Leading Quiescent Current 1.6mA (VDD = 5V), 1.2mA (VDD = 3.6V)
Filterless Operation Passes EN55022B-Radiated
Emissions with Up to 24in (61cm) of Speaker Cable
Evaluates the MAX9830B–MAX9830E (with IC Replacement)
2.6V to 5.5V Single-Supply Operation
2W Mono Class D Output
Differential or Single-Ended Input
Low-Power Shutdown Input
Fully Assembled and Tested
图2.MAX9830A评估板电路图
MAX9830A评估板元件列表:
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。