Cirrus CS4354 24位立体声数模转换方案
原标题:Cirrus CS4354 24位立体声数模转换方案
The CS4354 is a complete stereo digital-to-analog system including digital interpolation, third-order multi-bit delta-sigma digital-to-analog conversion, digital de-emphasis, analog filtering, and on-chip 2 VRMS line-level driver from a 5 V supply.
The advantages of this architecture include ideal differential linearity, no distortion mechanisms due to resistor matching errors, no linearity drift over time and temperature,
high tolerance to clock jitter, and a minimal set of external components.
The CS4354 is available in a 14-pin SOIC package in Commercial (-40°C to +85°C) grade. The CDB4354 Customer Demonstration Board is also available for device evaluation and implementation suggestions.
These features are ideal for cost-sensitive, 2-channel audio systems including video game consoles, Blu-Ray Disc® and DVD players, set-top boxes, digital TVs, and DAB/DMB devices.
CS4354主要特性:
Advanced Multi-bit Delta-Sigma Modulator
101 dB A-wt Dynamic Range
-86 dB THD+N
Single-ended Ground Centered Analog Architecture
– No DC-blocking Capacitors Required
– Integrated Inverting Charge Pump
– Filtered Line-level Outputs
– 2VRMS Full-scale Output
Low-latency Digital Filtering
Supports Sample Rates up to 192 kHz
24-bit I²S Input
+5 V Analog Supply with Integrated Inverting
Charge Pump and Regulator for Core Logic, and +1.8 V to +5 V Interface Power Supplies
50 mW Power Consumption
14-pin SOIC, Lead-free Assembly
图1。CS4354方框图
图2。CS4354典型连接框图
CS4354评估板
Evaluation Board for the CS4354
The CDB4354 evaluation board is a dedicated platform designed to facilitate the evaluation of the CS4354 24-bit, stereo D/A converter. Evaluation requires an analog signal analyzer, a digital signal source, and a +5 V power supply. Analog line-level outputs are provided via RCA phono jacks.
The CS8416 digital audio receiver IC provides the system timing necessary to operate the Digital-to-Analog converter and will accept S/PDIF and EIAJ-340-compatible audio data. The evaluation board may also be configured to accept external timing and data signals for operation in a custom user application during system development.
To accommodate various system configurations, several hardware controls and resistor population options are provided. Current sense resistors allow for easy power calculations during system development.
CS4354评估板主要特性:
Requires Only a Digital Signal Source and a +5 V Power Supply for a Complete Digital-to-Analog Converter System
Demonstrates Recommended Layout and Grounding Arrangements
CS8416 Receives S/PDIF, & EIAJ-340- Compatible Digital Audio
Header for External PCM Audio
Single-ended Stereo Analog Outputs
Power and S/PDIF Error Indicator LEDs
Hardware Controls: +5 V/3.3 V select for VL, De-emphasis select
Current Sense Resistors for CS4354 Supplies (VA and VL)
图3。CS4354评估板方框图
图4。CS4354评估板电路图:CS8416 和CS4354
图5。CS4354评估板电路图:电源
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。