0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >消费电子 > TI TPA2015高效D类音频功率放大解决方案

TI TPA2015高效D类音频功率放大解决方案

来源: 中电网
2019-11-21
类别:消费电子
eye 82
文章创建人 拍明

原标题:TI TPA2015高效D类音频功率放大解决方案

  TI 公司的TPA2015是高效D类音频功率放大器,采用电池跟踪SpeakerGuard AGC技术,并集成了自适应的升压转换器,能增加低输出功率的效率。3.6V电源时TPA2015能向8欧姆扬声器提供2W功率,THD为6%,效率85%。工作电压2.5V-5.2V,带自动恢复的热和短路保护,有三种增益设定:6 dB, 15.5 dB和20 dB,主要用在手机,PDA,GPS,手提电子学和扬声器。本文介绍了TPA2015主要特性,功能方框图,性能测试框图以及差分和单端输入典型应用方框图,放大器评估板TPA2015D1主要指标,电路图和材料清单。

  The TPA2015D1 is a high efficiency Class-D audio power amplifier with battery-tracking SpeakerGuard AGC technology and an integrated adaptive boost converter that enhances efficiency at low output power. It drives up to 2 W into an 8

speaker (6% THD). With 85% typical efficiency, the TPA2015D1 helps extend battery life when playing audio.

  The built-in boost converter generates a 5.5 V supply voltage for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. The SpeakerGuardTM AGC adjusts the Class-D gain to limit battery current and prevent heavy clipping.

  The TPA2015D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal to noise ratio (SNR).

  TPA2015主要特性:

  Built-In SpeakerGuard™ Automatic Gain Control (AGC)

  with Enhanced Battery Tracking

  Limits Battery Current Consumption

  Prevents Audio Clipping

  2 W into 8

Load From 3.6 V Supply (6% THD)

  Integrated Adaptive Boost Converter

  Increases Efficiency at Low Output Power

  Low Quiescent Current of 1.7 mA from 3.6 V

  Operates From 2.5 V to 5.2 V

  Thermal and Short-Circuit Protection with Auto Recovery

  Three Gain Settings: 6 dB, 15.5 dB, and 20 dB

  Independent Control for Boost and Class-D

  Pin-to-Pin Compatible with TPA2013D1

  Available in 1.954 mm × 1.954 mm 16-ball WCSP Package

  TPA2015应用:

  Cell Phones, PDA, GPS

  Portable Electronics and Speakers

  

  图1。TPA2015功能方框图

  

  图2。TPA2015测试框图

  

  图3。TPA2015差分输入典型应用方框图

  

  图4。TPA2015单端输入典型应用方框图

  

  图5。TPA2015采用外接输入滤波器降低DAC带外噪音

  音频功率放大器评估板TPA2015D1

  The TPA2015D1 audio power amplifier evaluation module is a complete, stand-alone audio board. It contains the TPA2015D1 WCSP (YZH) Class-D audio power amplifier with an integrated boost converter. All components and the evaluation module are Pb-Free.

  评估板TPA2015D1指标:

  

  

  图6。评估板TPA2015D1 EVM电路图

  评估板TPA2015D1 EVM材清单(BOM):

  

  



责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案