0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >电源管理 > Micrel MIC2166自适应降压电源控制方案

Micrel MIC2166自适应降压电源控制方案

来源: 中电网
2019-11-21
类别:电源管理
eye 117
文章创建人 拍明

原标题:Micrel MIC2166自适应降压电源控制方案


  Micrel 公司的MIC2166是同步自适应降压电源控制器,工作电压4.5V到28V,工作频率600kHz,输出电流高达25A,输出电压可调低至0.8V,精度±1%。主要用于STB,网关,路由器和DSL调制解调器,打印机,扫描仪,图像和视频卡,服务器,PC和处理器核电源以及低压分布电源。本文介绍了MIC2166主要特性,方框图,应用电路以及8V-24V 到1.2V/10A评估板电路图和评估板材料清单(BOM)。

  The Micrel MIC2166 is a synchronous adaptive on-time buck controller targeting high performance, cost sensitive applications such as set-top boxes, gateways, routers, computing peripherals, and telecom/networking equipment.

  The MIC2166 operates over a supply range of 4.5V to 28V. It has an internal linear regulator which provides a regulated 5V supply to power the internal control circuitry.

  MIC2166 operates at a constant 600kHz switching frequency and can be used to drive up to 25A of output current. The output voltage is adjustable down to 0.8V.

  A unique Hyper Speed Control™ architecture enables ultra-fast transient response while reducing the output capacitance and also makes High VIN/Low VOUT operation possible.A UVLO feature is provided to ensure proper operation under power-sag conditions to prevent the external power MOSFET from over heating. Also, a soft-start feature is provided to reduce the inrush current. Short current sensing on the bottom MOSFET with hiccup mode operation ensures protection in case of an output short circuit. Further, the MIC2166 includes an EN pin to shut down the converter and a PGOOD pin to allow simple sequencing.

  The MIC2166 is available in a 10 pin MSOP ePad package with a junction operating termperature range from –40℃ to +125℃. All support documentation can be found on

  Micrel’s web site at: www.micrel.com.

  MIC2166主要特性:

  • Hyper Speed Control™ architecture enables

  - High delta V operation (VIN=28V and VOUT=0.8V)

  - Smallest output capacitance

  • Built-in 5V regulator for single-supply operation

  • Any CapacitorTM stable

  - Zero ESR to high ESR

  • Power-Good output

  • Input voltage range: 4.5V to 28V

  • 5μA typical shutdown current

  • 25A output current drive capability

  • Output down to +0.8V with ±1% accuracy

  • 600kHz switching frequency

  • Internal 5ms digital soft-start

  • Thermal shutdown and hiccup current limit protection

  • No external current-sense resistor required

  • Pre-bias output safe

  • 10-pin MSOP ePad package

  • –40℃ to +125℃ junction temperature range

  MIC2166应用:

  • Set-top box, gateways, routers and DSL modems

  • Printers, scanners, graphic and video cards

  • Servers, PCs and processor core supply

  • Low-Voltage Distributed Power

  

  图1。MIC2166方框图

  

  图2。MIC2166可调输出600kHz降压转换器

  

  图3。MIC2166 8V-24V 到1.2V/10A评估板电路图

  评估板材料清单(BOM):

  



责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯