0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >工业控制 > TI AWR1843 77-79GHz FMCW雷达传感器解决方案

TI AWR1843 77-79GHz FMCW雷达传感器解决方案

来源: 中电网
2019-10-28
类别:工业控制
eye 215
文章创建人 拍明

原标题:TI AWR1843 77-79GHz FMCW雷达传感器解决方案

  TI公司的AWR1843是77-79GHz调频连续波(FMCW)雷达传感器,采用TI低功耗45nm RFCMOS工艺制造,具有非常高的集成度和非常小形状系统,工作频段76-81GHz.器件集成了DSP子系统,包含了用于雷达信号处理的高性能的C674x DSP.器件还包括BIST子系统,以进行无线电配置,控制和校准,以及基于用户可编程ARM R4F的汽车接口.具有四个接收通路,三个发送通路,基于分数N PLL的超精度啁啾引擎,TX功率12dBm,RX噪音(76-77GHz) 14dB,主要用在盲区检测,变道辅助系统,路口交通警报,停车辅助系统,占用检测以及简单手势识别和车门开启器应用.本文介绍了AWR1843主要特性,框图,处理器子系统框图,参考电路图以及评估模块AWR1843BOOST主要特性和电路图.

  The AWR1843 device is an integrated single-chip FMCW radar sensor capable of operation in the 76- to81-GHz band. The device is built with TI’s low-power 45-nm RFCMOS process and enablesunprecedented levels of integration in an extremely small form factor. The AWR1843 is an ideal solutionfor low-power, self-monitored, ultra-accurate radar systems in the automotive space.

  The AWR1843 device is a self-contained FMCW radar sensor single-chip solution that simplifies theimplementation of Automotive Radar sensors in the band of 76 to 81 GHz. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLLand A2D converters. It integrates the DSP subsystem, which contains TI’s high-performance C674x DSPfor the Radar Signal processing. The device includes a BIST processor subsystem, which is responsible for radio configuration, control, and calibration. Additionally the device includes a user programmable ARMR4F based for automotive interfacing. The Hardware Accelerator block (HWA) can perform radarprocessing and can help save MIPS on the DSP for higher level algorithms. Simple programming modelchanges can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility ofdynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as acomplete platform solution including reference hardware design, software drivers, sample configurations,API guide, and user documentation.

  AWR1843主要特性:

  • FMCW Transceiver

  – Integrated PLL, Transmitter, Receiver,Baseband, and A2D

  – 76- to 81-GHz Coverage With 4 GHz AvailableBandwidth

  – Four Receive Channels

  – Three Transmit Channels

  – Ultra-Accurate Chirp Engine Based onFractional-N PLL

  – TX Power: 12 dBm

  – RX Noise Figure:

  – 14 dB (76 to 77 GHz)

  – 15 dB (77 to 81 GHz)

  – Phase Noise at 1 MHz:

  – –95 dBc/Hz (76 to 77 GHz)

  – –93 dBc/Hz (77 to 81 GHz)

  • Built-in Calibration and Self-Test (Monitoring)

  – ARM® Cortex®-R4F-Based Radio ControlSystem

  – Built-in Firmware (ROM)

  – Self-calibrating System Across Frequency andTemperature

  • C674x DSP for FMCW Signal Processing

  • On-Chip Memory: 2MB

  • Cortex-R4F Microcontroller for Object Tracking andClassification, AUTOSAR, and Interface Control

  – Supports Autonomous Mode (Loading UserApplication from QSPI Flash Memory)

  • Integrated Peripherals

  – Internal Memories With ECC

  • Host Interface

  – CAN (Two Instances, One Being CAN-FD)

  • Other Interfaces Available to User Application

  – Up to 6 ADC Channels

  – Up to 2 SPI Channels

  – Up to 2 UARTs

  – I2C

  – GPIOs

  – 2-Lane LVDS Interface for Raw ADC Data andDebug Instrumentation

  • ASIL B Targeted

  • AECQ100 Qualified

  • AWR1843 Advanced Features

  – Embedded Self-monitoring With No HostProcessor Involvement

  – Complex Baseband Architecture

  – Embedded Interference Detection Capability

  – Programmable Phase Rotators in Transmit Pathto Enable Beam Forming

  • Power Management

  – Built-in LDO Network for Enhanced PSRR

  – I/Os Support Dual Voltage 3.3 V/1.8 V

  • Clock Source

  – Supports External Oscillator at 40 MHz

  – Supports Externally Driven Clock (Square/Sine)at 40 MHz

  – Supports 40 MHz Crystal Connection with LoadCapacitors

  • Easy Hardware Design

  – 0.65-mm Pitch, 161-Pin 10.4 mm × 10.4 mmFlip Chip BGA Package for Easy Assembly andLow-Cost PCB Design

  – Small Solution Size

  • Supports Automotive Temperature OperatingRange

  AWR1843应用:

  • Blind Spot Detection

  • Lane Change Assistance

  • Cross Traffic Alert

  • Parking Assistance

  • Occupancy Detection

  • Simple Gesture Recognition

  • Car Door Opener Applications

  

  图1.AWR1843框图

  

  图2.AWR1843汽车应用的自治雷达传感器框图

  

  图3.AWR1843处理器子系统框图

  评估模块AWR1843BOOST

  AWR1843 Evaluation Module (AWR1843BOOST) Single-Chip mmWave Sensing Solution The AWR1843 BoosterPack™ from Texas Instruments™ is an easy-to-use evaluation board for theAWR1843 mmWave sensing device, with direct connectivity to the microcontroller (MCU) LaunchPad™Development Kit. The BoosterPack contains everything required to start developing software for on-chipC67x DSP core and low-power Arm® R4F controllers, including onboard emulation for programming anddebugging as well as onboard buttons and LEDs for quick integration of a simple user interface.

  The AWR1843 BoosterPack from Texas Instruments is an easy-to-use evaluation board for the AWR1843mmWave sensing device, with direct connectivity to the microcontroller (MCU) LaunchPad DevelopmentKit. The BoosterPack contains everything required to start developing software for on-chip C67x DSP coreand low-power ARM R4F controllers, including onboard emulation for programming and debugging as wellas onboard buttons and LEDs for quick integration of a simple user interface.

  The standard 20-pin BoosterPack headers make the device compatible with a wide variety of TI MCULaunchPads and enables easy prototyping.

  评估模块AWR1843BOOST主要特性:

  • Two 20-pin LaundPad connectors that leverages the ecosystem of the TI LaunchPad

  • XDS110 based JTAG emulation with a serial port for onboard QSPI flash programming

  • Back-channel UART through USB-to-PC for logging purposes

  • Onboard antenna

  • 60-pin, high-density (HD) connector for raw analog-to-digital converter (ADC) data over LVDS andtrace-data capability

  • Onboard CAN-FD transceiver

  • One button and two LEDs for basic user interface

  • 5-V power jack to power the board

  评估模块AWR1843BOOST包括:

  • AWR1843 evaluation board

  • Mounting brackets, screws, and nuts to place the printed-circuit board (PCB) vertical

  • Micro USB cable to connect to PC

  

  图8.评估模块AWR1843BOOST外形图(正面)

  

  图9.评估模块AWR1843BOOST外形图(背面)

  

  图10.评估模块AWR1843BOOST框图

责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: TI 雷达传感器 FMCW

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案