原标题：Power Integrations TOPSwitch-HX电源解决方案

　　Power Integrations公司的TOPSwitch-HX系列是成本效益器件,在单个器件内集成了700V功率MOSFET,高压开关电流源,PWM控制,振荡器,热关断电路,故障保护以及其它控制电路.通用交流电压输入,在不加散热器的情况下,输出功率可高达35W,待机输入功率1W时的输出功率,在110V AC时大于600mW,而在265V AC输入时大于500mW.本文介绍了该系列中的TOP254-258系列的主要性能特点,以及进行开关电源设计所需的材料,包括各种应用电路图。

　　TOP254-258 TOPSwitch-HX Family

　　TOPSwitch-HX cost effectively incorporates a 700 V power MOSFET, high voltage switched current source, PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device.

　　产品亮点:

　　Lower System Cost, Higher Design Flexibility

　　Multi-mode operation maximizes effi ciency at all loads

　　No heatsink required up to 35 W using P, G and M packageswith universal input voltage and up to 48 W at 230 VAC

　　Output overvoltage protection (OVP) is user programmable for latching/non-latching shutdown with fast AC reset

　　Allows both primary and secondary sensing

　　Line undervoltage (UV) detection prevents turn-off glitches

　　Line overvoltage (OV) shutdown extends line surge limit

　　Accurate programmable current limit

　　Optimized line feed-forward for line ripple rejection

　　132 kHz frequency (Y package) reduces transformer and power supply size

　　Half frequency option in Y package for video applications

　　Tight I2f parameter tolerance reduces system cost

　　Maximizes MOSFET and transformer power delivery

　　Minimizes overload power, reducing cost of transformer,primary clamp and secondary components

　　Frequency jittering reduces EMI fi lter cost

　　Improved auto-restart delivers<3% of maximum power in short circuit and open loop fault conditions

　　Accurate hysteretic thermal shutdown function automatically recovers without requiring a reset

　　Fully integrated soft-start for minimum start-up stress

　　Pin-out simplifi es heatsinking to the PCB for P, G and M packages

　　Extended creepage between DRAIN and all other pins improves field reliability

　　Heatsink is connected to SOURCE for low EMI

　　Energy efficient over entire load range

　　No-load consumption<200 mW at 265 VAC

　　Standby power for 1 W input

　　>600 mW output at 110 VAC input

　　>500 mW output at 265 VAC input

　　图1.采用Opto/TL/431反馈的TOPSwitch-HX反激电源方框图.

　　图2a.P和G封装的TOP254-258功能方框图.

　　图2C.Y封装的TOP254-258功能方框图.

　　图2b.M封装的TOP254-258功能方框图.

　　图3.采用TOP258PN的35W双输出电路图.

　　图4.采用TOP258YN的150W,19.5V电源电路图.

　　图5.采用TOP258MN的20W(连续),80W(峰值)通用输入电源电路图.

　　图6.采用TOP258PN的通用输入35W电源电路图.