Maxim MAX8862手提设备高效电源管理方案
原标题:Maxim MAX8862手提设备高效电源管理方案
Maxim公司的 MAX8662/MAX8663是手提设备用的高效电源管理IC(PMIC),集成了两个同步降压稳压器(效率达95%),可驱动2-7个白光LED的1MHz升压稳压器,4个LDO以及用于单节锂电池的线性充电器,输入电压1.7V-5.5V,适配器或USB输入,主要用在智能手机,PDA,MP3和PMP以及无线手持设备等。本文介绍了MAX8662/MAX8663主要特性,方框图和应用电路和MAX8662评估板主要特性,电路图与材料清单。
The MAX8662/MAX8663 power-management ICs (PMICs) are efficient, compact devices suitable for smart cellular phones, PDAs, Internet appliances, and other portable devices. They integrate two synchronous buck regulators, a boost regulator driving two to seven white LEDs, four low-dropout linear regulators (LDOs), and a linear charger for a single-cell Li-ion (Li+) battery.
Maxim’s Smart Power Selector™ (SPS) safely distributes power between an external power source (AC adapter, auto adapter, or USB source), battery, and the system load. When system load peaks exceed the external source capability, the battery supplies supplemental current. When system load requirements are small, residual power from the external power source charges the battery. A thermal-limiting circuit limits battery-charge rate and external power-source current to prevent overheating. The PMIC also allows the system to operate with no battery or a discharged battery.
The MAX8662 is available in a 6mm x 6mm, 48-pin TQFN package, while the MAX8663, without the LED driver, is available in a 5mm x 5mm, 40-pin TQFN package.
MAX8662/MAX8663主要特性:
Two 95%-Efficient 1MHz Buck Regulators
Main Regulator: 0.98V to VIN at 1200mA
Core Regulator: 0.98V to VIN at 900mA
1MHz Boost WLED Driver
Drives Up to 7 White LEDs at 30mA (max)
PWM and Analog Dimming Control
Four Low-Dropout Linear Regulators
1.7V to 5.5V Input Range
15μA Quiescent Current
Single-Cell Li+ Charger
Adapter or USB Input
Thermal-Overload Protection
Smart Power Selector (SPS)
AC Adapter/USB or Battery Source
Charger-Current and System-Load Sharing
MAX8662/MAX8663应用:
Smart Phones and PDAs
MP3 and Portable Media Players
Palmtop and Wireless Handhelds
图1。MAX8662/MAX8663方框图和应用电路
MAX8662评估板
The MAX8662 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that evaluates the MAX8662 power-management IC. The MAX8662 integrates two synchronous rectified step-down regulators, a step-up regulator driving two to seven white LEDs (WLEDs), four low-dropout linear regulators (LDOs), and a linear charger for a single-cell Li-ion (Li+) battery. Maxim’s Smart Power Selector™ (SPS) safely distributes power between an external power source (AC adapter, auto adapter, or USB source), battery, and the system load.
MAX8662评估板主要特性:
Two 95%-Efficient 1MHz Synchronous Rectified Step-Down Regulators
One 1MHz Step-Up WLED Driver
Four LDO Regulators with Jumper-Selectable Output Voltages
Single-Cell Li+ Charger
Smart Power Selector (SPS)
Power-OK, Charger Status, and Timeout Fault Indicators
LED Analog Brightness and PWM Dimming Control
48-Pin, 6mm x 6mm x 0.8mm Thin QFN IC Package
Fully Assembled and Tested
MAX8662评估板应用:
3G Smart cellular phones
Other Handheld Devices
PDAs, portable media players (PMPs)
Portable GPS Navigation Devices (PNDs)
图2。MAX8662评估板电路图
MAX8662评估板所用材料清单:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。