基于Supertex HV9860升压电流模式LED驱动方案
原标题:Supertex HV9860升压电流模式LED驱动方案
Supertex公司的HV9860是电流模式控制的LED驱动器,采用峰值电流模式控制方案,包括采用跨导放大器来精确控制输出电流,使得输出电流精度高,内部电压源精度±2%,主要适合恒频模式下(内部开关频率100kHz)控制升压或反激LED驱动器,可用在DC/DC爱LED驱动器,RGB或白光LED背光应用,平板显示屏背光.本文介绍了功能方框图和典型应用电路图.
The HV9860 is a current mode control LED driver IC designed to control a boost or flyback LED driver in constant frequency mode. The controller uses a peak current-mode control scheme and includes an internal transconductance amplifier to accurately control the output current over all line and load conditions. The IC also provides a disconnect switch gate drive output, which can be used to achieve good PWM rise and fall times for the LED current using an external disconnect FET.
The HV9860 also has a DUTY pin which can be used to set the maximum duty cycle to either 90%(typ) or 75%(typ). The 75% duty cycle limit can be used for flyback applications.
The HV9860 also provides a TTL compatible, low-frequency PWM dimming input that can accept an external control signal with a duty ratio of 0-100% and a frequency of up to a few kilohertz.
The HV9860 includes a wiring fault detection function that sends a flag to the boost input power supply in case of an LED to wiring fault.
HV9860主要特性:
►► Switch mode controller for boost and flyback converters
►► Discontinuous conduction mode of operation
►► High output current accuracy
►► Internal ±2% voltage reference (0OC
►► Internally fixed 100kHz switching frequency
►► Hiccup mode protection for both short circuit and open circuit conditions
►► LED wiring fault detection to detect short cathode to ground condition
HV9860应用:
►► DC/DC LED driver applications
►► RGB or white LED backlight applications
►► Flat panel display backlighting
图1。HV9860功能方框图
图2。HV9860典型应用电路图
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。