NXP SSL2101 7.5W反激LED驱动参考设计
原标题:NXP SSL2101 7.5W反激LED驱动参考设计
采用nxp公司 SSL2101 的7.5W 120V可调光的LED驱动器的参考设计采用反激式转换器,提供隔离的解决方案。参考设计支持5个LED(输出电流470mA)和7个LED(输出电流340mA)负载,输出功率大约为7.5W,效率大约为72%,适合于GU10灯。本文介绍了7.5W反激LED驱动参考设计主要指标,驱动5个和7个LED的演示板电路图以及相应的材料清单和PCB布局图。
SSL2101 120 V 7.5 W GU10 flyback reference board
This document explains the operation and application of a 7.5 W 120 V dimmable LED driver featuring the SSL2101. The demo board has a form factor that is compatible with the base of a GU10 LED lamp. The board employs a flyback converter to provide an isolated solution for mains-dimmable LED recessed-light applications.
The board is available in two different versions, designed to support both a 5-LED and 7-LEDs load with an output power of approximately 7.5 W. The board operates at approximately 45 kHz and produces a regulated output current of 470 mA for the 5-LED load or 340 mA for the 7-LED load, with an efficiency of around 72 %. Both versions are fully compliant with EMC regulations. Key features of the board include:
• Deep dimming capability
• Wide dimming compatibility
• Small form factor tailored to fit a GU10 lamp
• Cost effectiveness
图1。SSL2101演示板外形图(顶视图)
7.5W反激LED驱动参考设计主要指标:
图2。驱动5个LED的演示板电路图
图3。驱动7个LED的演示板电路图
5个LED负载的SSL2101 120 V 演示板材料清单:
7个LED负载的SSL2101 120 V 演示板材料清单:
图4。演示板元件布局图
图5。演示板变压器主要指标
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。