原标题：TI DRV8818步进马达驱动解决方案

　　TI公司的DRV8818是用于打印机,扫描仪和其它自动化设备的步进马达驱动器,集成了两个H桥驱动器和用来控制步进马达的微步距分度器逻辑.微步距马达驱动器采用PWM,可提供1/8步操作,每个绕组的电流高达2.5A,主要用在打印机,纺织机械,定位/跟踪,工厂自动化和机器人.本文介绍了DRV8818主要特性, 方框图和马达驱动电路以及评估模块DRV8818EVM方框图,电路图和材料清单.

　　The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.

　　The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.

　　A simple step/direction interface allows easy interfacing to controller circuits. Pins allow configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.

　　Internal shutdown functions are provided for over current protection, short circuit protection, under-voltage lockout and overtemperature.

　　DRV8818主要特性:

　　Pulse Width Modulation (PWM) Microstepping Motor Driver

　　Built-In Microstepping Indexer

　　Up to 2.5-A Current Per Winding

　　Microstepping Indexer Provides up to 1/8-Step Operation

　　Low 0.37-Ω (HS + LS) MOSFET On-Resistance (at 25°)

　　Programmable Mixed Decay, Blanking, and Off Time

　　Pin-Compatible Upgrade to DRV8811 With Lower Rds(on)

　　Thermally Enhanced Surface Mount Package

　　DRV8818应用:

　　• Printers

　　• Textile Machinery

　　• Positioning/Tracking

　　• Factory Automation

　　• Robotics

　　图1.DRV8818方框图

　　图2.DRV8818马达驱动电路

　　评估模块DRV8818EVM

　　The DRV8818EVM is a complete solution for evaluating the DRV8818 micro-stepping, bipolar stepper driver. It includes a USB link to provide easy control from a personal computer (PC), a MSP430 microcontroller that interprets serial commands from the PC and generates control signals to the driver device, and the DRV8818 device with access to all signals for a complete evaluation.

　　图3.评估模块DRV8818EVM外形图

　　图4.评估模块DRV8818EVM方框图

　　评估模块DRV8818EVM材料清单:

　　详情请见: