基于TI公司的TPS22967单通道4A负载开关参考设计方案
原标题:TI TPS22967单通道4A负载开关参考设计方案
TI公司的TPS22967是一款小型超低导通电阻的单通道负载可控制转换开关器件,内建N沟道MOSFET都场效应管,输入电压范围为:0.8V至5.5V,最大持续电流为4A。该芯片可以通过一个低电压控制信号控制开关。当开关关断时,在TPS22967内部有一个225Ω的下拉电阻,可以快速地对输出端进行放电。本文首先介绍芯片的简介、特性、内部框图及应用领域,并给出相应设计方案的设计原理图、元器件列表及PCB元件布局图。
The TPS22967 is a small, ultra-low RON, single channel load switch with controlled turn on. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.8V to 5.5V and can support a maximum continuous current of 4A. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. In the TPS22967, a 225-Ω pull-down resistor is added for quick output discharge when switch is turned off.
The TPS22967 is available in a small, space-saving 2mm x 2mm 8-pin SON package (DSG) with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to 85°C.
TPS22967主要特性:
Integrated Single Channel Load Switch
Input Voltage Range: 0.8V to 5.5V
Ultra low RON Resistance
RON = 22mΩ at VIN = 5V (VBIAS = 5V)
RON = 22mΩ at VIN = 3.6V (VBIAS = 5V)
RON = 22mΩ at VIN = 1.8V (VBIAS = 5V)
4A Maximum Continuous Switch Current
Low Quiescent Current (50µA)
Low Control Input Threshold Enables Use of 1.2V/1.8V/2.5V/3.3V Logic
Configurable Rise Time
Quick Output Discharge (QOD)
SON 8-pin Package With Thermal Pad
ESD Performance Tested per JESD 22
2KV HBM and 1KV CDM
TPS22967应用:
Ultrabook
Notebooks/Netbooks
Tablet PC
Consumer Electronics
Set-top Boxes/Residental Gateways
Telecom Systems
Solid State Drives (SSD)
图1. TPS22967内部方框图
TPS22967方案介绍:
The TPS22967EVM-023 evaluation module contains a single channel, ultra low ON resistance, 4-A load switch with controlled turn-on and adjustable rise time。
TPS22967方案原理图:
图2. TPS22967方案原理图
TPS22967方案材料清单:
PCB元件布局图:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。