基于PIC16F883核心芯片的家用语音识别触摸开关面板解决方案
原标题:家用语音识别触摸开关面板方案
方案详情
核心芯片型号:PIC16F883
本方案使用于86开关面板,可直接替换,无需重新走线。表面钢化玻璃,美观大方,有夜光功能,触摸按键和语音双控制,无触电危险。符合3C强制认证,采用阻燃外壳,单火线低功耗供电设计。
应用场合与方案优势:
对于已经装修完毕的家庭,可直接替换原有的开关面板,接好线以后就能对其进行控制了。语音控制科技感强,识别率高,属于非特定人声识别技术,无需学习特定人的声音。市面上只有触摸开关面板或者是触摸带无线控制的开关面板,对于这种语音控制的面板还是空白,并且也可以加上无线控制的功能,实现和其他智能家居设备的联网。
【PIC16F883】
Features:
Factory calibrated to ±1%
Software selectable frequency range of 8 MHz to 32 kHz
Software tunable
Two-Speed Start-Up mode
Fail-safe clock monitoring for critical applications
Clock mode switching during operation for low-power operation
Device Overview
Summary
This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F883 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.
Additional Features
Special Microcontroller Features:
Precision Internal Oscillator:
Factory calibrated to ±1%
Software selectable frequency range of 8 MHz to 32 kHz
Software tunable
Two-Speed Start-Up mode
Fail-safe clock monitoring for critical applications
Clock mode switching during operation for low-power operation
Power-Saving Sleep mode
Power-on Reset (POR)
Selectable Brown-out Reset (BOR) voltage
Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
In-Circuit Serial Programming™ (ICSP™) via two pins
In-Circuit Debug (ICD) via two pins
High-endurance Flash/EEPROM cell:
100,000 erase/write cycle enhanced Flash program memory, typical
1,000,000 erase/write cycle data EEPROM memory, typical
Data EEPROM retention > 40 years
Self-reprogrammable under software control
Programmable code protection
Peripheral Features:
Device Features:
1 input only pin
25 I/O
High sink/source current 25 mA
Interrupt-on-pin change option
Timers:
TMR0: 8-bit timer/counter with 8-bit prescaler
TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator
TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
Capture/Compare/PWM (CCP) module
Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering
Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability
Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
Supports RS-485, RS-232 and LIN compatibility
Auto-Baud Detect
Auto-wake-up on Start bit
Ultra Low-Power Wake-up (ULPWU)
Analog Features:
10-bit 11 channel Analog-to-Digital (A/D) Converter
2 Analog Comparator modules with:
Programmable on-chip Voltage Reference (CVREF) module (% of VDD)
Fixed 0.6 Vref
Comparator inputs and outputs externally accessible
SR Latch mode
Parametrics
Name
Value
Program Memory Type
Flash
Program Memory Size (KB)
7
CPU Speed (MIPS/DMIPS)
5
SRAM Bytes
256
Data EEPROM/HEF (bytes)
256
Digital Communication Peripherals
1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals
2 Input Capture, 1 CCP, 1 ECCP,
Timers
2 x 8-bit, 1 x 16-bit
ADC Input
11 ch, 10-bit
Number of Comparators
2
Temperature Range (C)
-40 to 125
Operating Voltage Range (V)
2 to 5.5
Pin Count
28
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。