基于TI公司的TPS7H1101-SP 1.5V至7V超低压降稳压器电源参考设计方案
原标题:TI TPS7H1101-SP 1.5V至7V超低压降稳压器电源参考设计方案
TI公司的TPS7H1101-SP是一款采用PMOS工艺元件配置的超低压降线性稳压电源器件。该器件具有较宽的电压输入范围(1.5V至7V),同时提供优质的电源电压抑制比(PSRR)。该芯片最主要的特性是通过可编程反馈电流限制使芯片具有较宽的输出调节范围,同时提供很高的精确输出。该芯片主要用于为FPGA、DSP、MCU等具有复杂电源要求的芯片提供电能。本文首先介绍芯片的简介、特性、内部框图及应用领域,并给出相应设计方案的设计原理图、元器件列表及PCB元件布局图。
The TPS7H1x01 is a low dropout (LDO) linear regulator that uses a PMOS pass element configuration. It operates under wide range of input voltage, from 1.5 V to 7V while offering excellent PSRR. The TPS7H1x01 features a precise and programmable fold back current limit implementation with a very wide adjustment range. To support complex power requirements of FPGAs, DSPs, or Microcontrollers the TPS7H1x01 provides enable on/off functionality, programmable SoftStart, current sharing capability, and a PowerGood open drain output. The TPS7H1x01 is available in a thermally enhanced16-pin ceramic flatpack package (CFP) .
TPS7H1101-SP主要特性:
Current Share/Parallel Operation to Provide Higher
Output Current
Wide VIN Range: 1.5 V – 7 V
TPS7H1101-SP:
Total Dose (TID) Tolerance > 100kRAD(Si)
Single Event Latchup (SEL) Immune to
LET = 85MeV-cm2/mg
SEB and SERG Immune to
LET = 85MeV-cm2/mg
SET/SEFI Onset Threshold
is = 40MeV-cm2/mg
SET/SEFI Cross-Section Plot,
See Radiation Report
Stable With Ceramic Output Capacitor
±2.0 % Accuracy over Line,
Load and Temperature (TPS7H1101-SP)
±4.2 % Accuracy over Line,
Load and Temperature (TPS7H1201-HT)
Programmable SoftStart
PowerGood Output
Low Dropout Voltage
TPS7H1201-HT
100 mV (MAX) at 0.5 A (210°C)
TPS7H1101-SP
75 mV at 1 A (25°C)
210 mV at 3 A (25°C)
335 mV (MAX) at 3A (125°C)
Low Noise
TPS7H1201-HT
(17 x VOUT) µV RMS
TPS7H1101-SP
(27 x VOUT) µV RMS
PSRR: Over 45 dB at 1 kHz
Load/Line Transient Response
Fold-Back Current Limit (TPS7H1101-SP)
16-Pin Ceramic Flatpack Package (HKS/HKR)
TPS7H1101-SP应用:
TPS7H1101-SP: Rad Tolerant Applications
RF 5-V Components VCOs, Receivers, ADCs, Amplifiers
Clock Distribution
Clean Analog Supply Requirements
Supports Harsh Environment Applications
TPS7H1201-HT Available in Extreme (–55°C to 210°C) Temperature Range
TPS7H1101-SP Available in Military (–55°C to 125°C) Temperature Range
TPS7H1201-HT: Texas Instruments’ high temperature products utilize highly optimized silicon (die) solutions with design and process enhancements to maximize performance over extended temperatures.
Engineering Evaluation (/EM) Samples are Available
图1. TPS7H1101-SP内部方框图
TPS7H1101-SP方案介绍:
This user’s guide describes the characteristics, operation, and use of the TPS7H1101SP evaluation module (EVM). This EVM demonstrates the Texas Instruments TPS7H1101SP ultra-low Dropout LDO regulator. It is rated for 3-A ultra low-dropout (LDO) voltage regulator. This user’s guide includes setup instructions, a schematic diagram, a bill of materials (BOM), and PCB layout drawings for the EVM.
TPS7H1101-SP方案材料清单:
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。