基于NXP公司的JN516x无线MCU智能家居照明方案
原标题:NXP JN516x无线MCU智能家居照明方案
nxp公司的智能家居照明方案采用基于NXP JN516x无线MCU的ZigBee光链接(ZLL)网络,具有无线IP连接,节能照明和待机功耗低(目前是150mW,以后要降到50mW)以及小型低成本等优点.
NXP’s GreenChip smart lighting solution brings together wireless IP connectivity, energy-efficient lighting and low standby power (150mW, roadmap down to 50mW) in a compact, low-cost solution, which enables new ways to control lights and manage energy consumption.
图1。NXP智能家居照明示意图
基于NXP JN516x无线MCU的ZigBee光链接(ZLL)网络
图2.JN516x无线MCU框图
This Application Note provides a ZigBee Light Link (ZLL) wireless network solution which uses the NXP JN516x-EK001 Evaluation Kit. The demonstration allows the user to control ZLL Lighting devices from ZLL Controller devices. From the evaluation kit:
• the Lighting/Sensor Expansion Boards (DR1175) are used as ZLL Lighting devices
• the Remote Control Unit (DR1159) is used as a ZLL Controller device
The ZigBee Light Link (ZLL) network consists of a combination of ZLL Controller and ZLL Lighting devices.
ZLL 控制器器件:
ZLL 照明器件:
图3.NXP智能照明方案平台
NXP智能照明方案主要特性和优势:
Flexible, easily scalable and cost-effective software solution
IP-enabled highly secure smart lighting system with JenNet-IP software stack and secure commissioning/communication feature
Robust up to 500 nodes with network self-healing & re-shaping
Future-proof development with “Over-Network-Download” capability
Supports both gateway and standalone network operation with simple, secure commissioning using a remote
(Ultra-) low standby power when lamp is off
Multiple control options
Alternatively ZigBee-based lighting standards also supported
Best-in-Class energy efficiency both when lamp is on and off
Low BOM cost (ICs, external components, PCBs)
Flexible solution due to full range of NXP lighting drivers, AC/DC converters, and high -performance, IEEE 802.15.4 single-chip transceivers and MCUs
Deep dimmability and optional triac dimmer compatibility
Multiple control options:
1. Battery-powered switches and RF remote control with >10 years battery lifetime, captouch remote control
2. Dual-boot option for remote (e.g. running both RF4CE and JenNet/ZigBee protocols)
3. PCs, tablets, smartphones, etc. via gateway
4. Battery-less energy harvesting switches (roadmap)
Range of iCFL and isolated & non-isolated iSSL reference designs
Supported software stacks and size (excluding application)
1. JenNet-IP and application-specific options ~ 120 kB
2. JenNet standard ~ 50 kB
3. ZigBee Home Automation ~ 120 kB
4. ZigBee LightLink ~ 128 kB
5. ZigBee Green Power ~ 10 kB
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。