原标题：ST STGIB15CH60TS-L马达控制电源板参考设计

　　ST公司的STGIB15CH60TS-L是SLLIMM™ - 2系列低损耗智能电源模块(IPM),提供在低压MCU和主电源马达间直接连接,工作频率高达20kHz,功率范围高达3kW.器件在25°C时额定电流3A-5A,耐压600V,主要用于马达驱动的三相逆变器,以及家用电器如洗衣机,电冰箱,空调和缝纫机等.本文介绍了STGIB15CH60TS-L 主要特性,功能框图和应用框图,以及马达控制电源板STEVAL-IPM15B主要特性,架构图,电路图,材料清单和PCB设计图.

　　SLLIMM™ - 2nd series IPM, 3-phase inverter, 20 A, 600 V short-circuit rugged IGBTs ST’s SLLIMM™ family of small low-loss intelligent molded modules enhances the efficiency of home appliance motor drives working up to 20 kHz in hard-switching circuitries and of applications with a power range up to 3 kW.

　　ST’s intelligent power modules (IPMs) provide a direct connection between a low-voltage microcontroller and a mains-powered electric motor. They greatly reduce costs by simplifying design and significantly reducing component count while saving space, improving reliability and lowering EMI. Available in several package options (fully molded and DBC), current ratings and driving options, they feature the best compromise between conduction and switching losses, along with outstanding robustness and EMI behavior.

　　STGIB15CH60TS-L主要特性:

　　3A-5A current rating at 25℃, with 600V breakdown voltage;

　　Lower VCE(sat) 1.65V even at 5A, due to the TFS technology;

　　Low EMI;

　　Mounted slot package options allowing easier and lower-cost heatsink assembly;

　　Integrated bootstrap diode for lower BOM and simplified PCB layout;

　　150°C maximum operating junction temperature;

　　Integrated op amp and comparator that can be used for protection circuits;

　　Separate open emitter outputs to simplify PCB routing for both single and three shunt solutions;

　　NTC (Negative Temperature Coefficient) for temperature monitoring;

　　Smart shutdown function;

　　In-line and zig-zag lead options, with/without stand-off, for maximum layout flexibility;

　　1500 Vrms minimum isolation

　　STGIB15CH60TS-L应用:

　　• 3-phase inverters for motor drives

　　• Home appliances such as washing machines,refrigerators, air conditioners and sewing

　　machines

　　图1.STGIB15CH60TS-L框图

　　图2.STGIB15CH60TS-L应用框图

　　马达控制电源板STEVAL-IPM15B

　　The STEVAL-IPM15B is a compact motor drive power board based on the SLLIMM™ (small low-loss intelligent molded module) 2nd series module STGIB15CH60TS-L. It provides an affordable, easy-to-use solution for driving high power motors for a wide range of applications such as white goods, air conditioners,compressors, power fans, high-end power tools, and generally 3-phase inverters for motor drives. The IPM itself consists of short-circuit rugged IGBTs and a wide range of features including undervoltage lockout, smart shutdown, temperature sensing and NTC inside, and overcurrent protection. The main characteristics of this evaluation board are its small size, minimal BOM and high efficiency. It consists of an interface circuit (BUS and Vcc connectors), bootstrap capacitors, snubber capacitor, hardware short-circuit protection, fault event signal and temperature monitoring. In order to increase its flexibility,it was designed to work in single or three-shunt configuration and with double current sensing options such as three dedicated op-amps on-board, or op-amps embedded on the MCU. A Hall/Encoder part completes the circuit. Thanks to these advanced characteristics, the system has been specifically designed to achieve accurate and fast conditioning of the current feedback, matching the typical requirements for field-oriented control (FOC). The STEVAL-IPM15B is compatible with ST’s STM32-based control board, providing a complete platform for motor control.

　　马达控制电源板STEVAL-IPM15B主要特性:

　　Input voltage: 125 - 400 VDC

　　Nominal power: up to 1500 W

　　Input auxiliary voltage: up to 20 V DC

　　Single- or three-shunt resistors for current sensing (with sensing network)

　　Two options for current sensing: dedicated op-amps or through MCU

　　Overcurrent hardware protection

　　IPM temperature monitoring and protection

　　Hall sensor or encoder input

　　Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2nd series of SLLIMM™ IPMs

　　Motor control connector (32-pin) to interface with ST MCU boards

　　Universal conception for further evaluation with breadboard and testing pins

　　Very compact size

　　图3.马达控制电源板STEVAL-IPM15B架构图

　　图4.马达控制电源板STEVAL-IPM15B外形图(正面)

　　图5.马达控制电源板STEVAL-IPM15B外形图(背面)

　　马达控制电源板STEVAL-IPM15B材料清单: