基于STM32F103C8T6主控MCU+MC20模块的GPS+LBS双重定位解决方案
原标题:GPS+LBS双重定位方案
应用领域:智能穿戴
方案类型:模块板卡
主要芯片:Freescale;MTK;STM;
方案概述
GPS+LBS定位方案(STM32F103+MC20)
1. 关于本文
1.1. 目的
本文是对基于移远MC20模块实现了GPS+基站双重定位功能方案,采用低功耗设计。
本案例为真实项目案例,只是为宣传我司的成熟技术,为保护客户隐私,不提供案例相关的任何技术资料、产品资料等。
专注提供智能硬件产品及产品级解决方案。
1.2. 关键字
GPS;LBS;基站定位;2G;stm32f103;
2. 定位功能产品样板展示
2.1. 硬件功能板样式
2.2. 案例产品的主要功能
1、主控MCU:STM32F103C8T6
2、GPS定位:移远MC20模组
该模组支持:2G通信及GPS定位功能
3、锂电池供电
4、板子支持适配器5V充电
2.3. 硬件设计的基本参数
工作电压 | 3.0~4.2V (其中MC20模组电压3.3V以下将不再工作) |
工作环境 | 温度:-10~60℃ |
湿度:5%RH~80%RH | |
通讯方式 | 2G通信 支持移动、联通、电信物联网卡 |
工作模式 | GPS为定时唤醒工作机制 |
操作系统 | Freertos系统 |
协议类型 | TCP协议,接入客户的后台服务器 |
上报数据 | GPS定位数据、LBS基站数据、 |
电池电量、低电量报警等 |
2.4. 优势服务
客户一经使用我司产品及技术,将持续获益:
1、我司持续进行产品技术的更新迭代,能及时为客户提供新的技术升级服务。
2、我司产品支持在线OTA升级,远程更新。
2.5. 售前、售后服务支持
2.5.1. 软件定制开发售后服务
1、7×12小时 技术服务
2、三个月免费维护(终身有偿技术升级服务)
【STM32F103C8T6】
Mainstream Performance line, ARM Cortex-M3 MCU with 64 Kbytes Flash, 72 MHz CPU, motor control, USB and CAN
The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
Key Features
ARM®32-bit Cortex®-M3 CPU Core
72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
Single-cycle multiplication and hardware division
Memories
64 or 128 Kbytes of Flash memory
20 Kbytes of SRAM
Clock, reset and supply management
2.0 to 3.6 V application supply and I/Os
POR, PDR, and programmable voltage detector (PVD)
4-to-16 MHz crystal oscillator
Internal 8 MHz factory-trimmed RC
Internal 40 kHz RC
PLL for CPU clock
32 kHz oscillator for RTC with calibration
Low-power
Sleep, Stop and Standby modes
VBAT supply for RTC and backup registers
2 x 12-bit, 1 μs A/D converters (up to 16 channels)
Conversion range: 0 to 3.6 V
Dual-sample and hold capability
Temperature sensor
DMA
7-channel DMA controller
Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
Up to 80 fast I/O ports
26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
Debug mode
Serial wire debug (SWD) & JTAG interfaces
7 timers
Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
16-bit, motor control PWM timer with dead-time generation and emergency stop
2 watchdog timers (Independent and Window)
SysTick timer 24-bit downcounter
Up to 9 communication interfaces
Up to 2 x I2C interfaces (SMBus/PMBus)
Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 2 SPIs (18 Mbit/s)
CAN interface (2.0B Active)
USB 2.0 full-speed interface
CRC calculation unit, 96-bit unique ID
Packages are ECOPACK®
STM32F103C8T6 CIRCUIT DIAGRAM
【GSM/GPRS/GNSS MC20】
MC20模块采用联发科技最新推出的多功能通信定位芯片研制而成。它是一款集成LCC封装、四频段GSM/GPRS和先进算法GNSS引擎于一体的全功能通信模块,具有超小体积、低功耗、双卡单待等优势。MC20不仅内嵌丰富的网络协议(如 TCP、UDP、PPP、FTP、HTTP以及SSL),还集成了多星座卫星系统(如北斗、GPS、QZSS),因此能提供无线移动通信以及精准的导航定位功能。
产品概述
MC20模块采用联发科技最新推出的多功能通信定位芯片研制而成。它是一款集成LCC封装、四频段GSM/GPRS和先进算法GNSS引擎于一体的全功能通信模块,具有超小体积、低功耗、双卡单待等优势。MC20不仅内嵌丰富的网络协议(如 TCP、UDP、PPP、FTP、HTTP以及SSL),还集成了多星座卫星系统(如北斗、GPS、QZSS),因此能提供无线移动通信以及精准的导航定位功能。
除具备GSM/GPRS无线通信功能外,MC20模块还支持先进的GNSS技术。它集成了EPOTM(用户无需自设服务器,直接从MTK服务器获取EPO数据)、秒定等技术,能够实现快速首次定位。由于支持北斗、GPS、QZSS等多星座卫星系统解调算法,其定位更加精准,抗多路径干扰能力更强,比传统GPS模块具有更多优势。另外,MC20模块中内置LNA和低功耗算法:前者使其接收灵敏度提升至-149dBm;后者使其在低功耗模式(GLP Mode)下的耗流仅为正常工作模式的40%。
MC20模块较传统GSM+GNSS方案体积减少40%,使其在各种应用中占具更大优势。其主要应用领域为:可穿戴设备(智能手表)、宠物追踪、财产追踪及行车记录仪等等。
主要优势
● 超小体积: 18.7mm × 16.0mm × 2.1mm
● 多卫星导航系统: GPS/BeiDou/QZSS
● GNSS 接收机通道: 99 路捕获通道/33 路跟踪通道
● 支持多种 AGPS 技术,如 EASYTM 、EPOTM 、秒定等
● 内置 LNA 大大提升 GNSS 接收机灵敏度(-167dBm@跟踪模式):可使用无源 GNSS 天线而无需任何外部低噪声放大器
● 支持增强型 GNSS 功能,如 SDK 命令、LOCUSTM 、AIC 和 GLP
● 多功能四频段 GSM模块: 850/900/1800/1900MHz
● 内嵌丰富网络协议: TCP/UDP/PPP/HTTP/FTP/SSL
● 支持语音、短信、QuecFOTATM 、双卡单待以及 OpenCPU 功能
● 支持蓝牙 V3.0 以及 SPP & HFP-AG 配置文件
特点
型号 | MC20 |
GSM/EDGE | 850/900/1800/1900MHz |
GNSS | GPS/Beidou/QZSS |
蓝牙 | BT 3.0 |
突出特性 | EASYTM/LOCUSTM/AlwaysLocateTM/EPOTM/GLP/AIC/SDK命令/秒定/双卡单待/OpenCPU |
区域 | 中国 |
认证 | SRRC/CCC/NAL/CE/FCC/AITC |
责任编辑:David
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。