0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >工业控制 > 模块板卡:基于STM32F429IGT6主控芯片的Core429I核心板方案

模块板卡:基于STM32F429IGT6主控芯片的Core429I核心板方案

来源: 电子方案网
2018-12-12
类别:工业控制
eye 346
文章创建人 拍明

原标题:STM32F429IGT6为主控芯片的核心板方案

  

  应用领域:电子元器件

  方案类型:模块板卡

  主要芯片:STM;

  方案概述

  Core429I是一款基于STM32F429IGT6为主控芯片的核心板,它的主要特点是:

  板载MCU的基本电路,包括晶振电路,USB电源管理电路,USB接口

  板载64MBIT的SDRAM

  引出了所有I/O资源

  带JTAG/SWD调试下载接口

  排针间距2.0mm,体积较小,适合接入用户系统

  如下内容:

  原理图

  示例程序(C程序、μC/OS-II)

  STM32开发软件(KEIL等软件)

  STM32器件手册

  STM32开发资料

  资料路径:www.waveshare.net/wiki/Core429I

基于STM32F429IGT6主控芯片的Core429I核心板方案.png

  • 基于STM32F429IGT6主控芯片的Core429I核心板方案基于STM32F429IGT6主控芯片的Core429I核心板方案基于STM32F429IGT6主控芯片的Core429I核心板方案基于STM32F429IGT6主控芯片的Core429I核心板方案基于STM32F429IGT6主控芯片的Core429I核心板方案


  【STM32F429IGT6】

  High-performance advanced line, ARM Cortex-M4 core with DSP and FPU, 1 Mbyte Flash, 180 MHz CPU, ART Accelerator, Chrom-ART Accelerator, FMC with SDRAM, TFT

  Low power

  The STM32F427xx and STM32F429xx devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

  The STM32F427xx and STM32F429xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

  All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.

  Key Features

  Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

  Memories

  Up to 2 MB of Flash memory organized into two banks allowing read-while-write

  Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM

  Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories

  LCD parallel interface, 8080/6800 modes

  LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)

  Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)

  Clock, reset and supply management

  1.7 V to 3.6 V application supply and I/Os

  POR, PDR, PVD and BOR

  4-to-26 MHz crystal oscillator

  Internal 16 MHz factory-trimmed RC (1% accuracy)

  32 kHz oscillator for RTC with calibration

  Internal 32 kHz RC with calibration

  Sleep, Stop and Standby modes

  VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

  3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode

  2×12-bit D/A converters

  General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

  Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

  Debug mode

  SWD & JTAG interfaces

  Cortex-M4 Trace Macrocell™

  Up to 168 I/O ports with interrupt capability

  Up to 164 fast I/Os up to 90 MHz

  Up to 166 5 V-tolerant I/Os

  Up to 21 communication interfaces

  Up to 3 × I2C interfaces (SMBus/PMBus)

  Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)

  Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock

  1 x SAI (serial audio interface)

  2 × CAN (2.0B Active) and SDIO interface

  Advanced connectivity

  USB 2.0 full-speed device/host/OTG controller with on-chip PHY

  USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

  10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  8- to 14-bit parallel camera interface up to 54 Mbytes/s

  True random number generator

  CRC calculation unit

  RTC: subsecond accuracy, hardware calendar

  96-bit unique ID


责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: STM32 核心板

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案