0 卖盘信息
BOM询价
您现在的位置: 首页 > 品牌信息 > OUELLET

关于OUELLET

OUELLET

1960年,Charles-ÉmileOuellet 创立了Ouellet Canada公司,总部位于魁北克的l'Islet。主要产品有加热器、防爆对流加热器、红外辐射加热器、干手器、铝制闸板、加热电缆、电热板、热损失校准器、电子恒温器、继电器等,主要应用于建筑、工业、商业、暖通等领域。
为您找到相关结果 9390 823 /939
OACP8008AM
型号:
OACP8008AM
品牌:
威力
产品分类:
其他风扇,热管理
描述:
OACP    Commercial Ceiling Fan HeaterThe commercial ceiling fan OACP heater is similar to the OAC model but is designed for ceiling mounting when no wall space is available.FeaturesColor• Standard: white, almond.• Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.• Custom colors available upon request.Finish• Standard: epoxy/polyester powder paint.Voltage• 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction• 18-gauge steel front cover.• High-limit temperature control with automatic reset.Fan• Factory-lubricated motor (open and ventilated).• 160 cfm fan (single unit: 55.5 dBA), 2 X 160 cfm fan (double unit: 58.5 dBA).• Fan delay purges heater of residual heat.Heating element• Durable tubular heating element with fins.Control• 240/208V control circuit standard with contactor when needed (except 120V model).• 24V relay, with or without transformer available.• Built-in thermostat available.Note: If an electronic thermostat is used, it must be compatible with forced-air heaters.Any remote thermostat or relay must be connected to the heater control terminal block.Installation• Maximum recommended installation height: 10 ft. (3 m).• Minimum clearance from adjacent walls: 10 in. (25.4 cm).• Adaptor for surface mounting available.• Adaptor for T-Bar ceiling available.Warranty• 3-year warranty against defects.Application• Apartment building, commercial building, drop ceiling, stairwell, garage.
OACP8008AM-R
型号:
OACP8008AM-R
品牌:
威力
产品分类:
其他风扇,热管理
描述:
OACP    Commercial Ceiling Fan HeaterThe commercial ceiling fan OACP heater is similar to the OAC model but is designed for ceiling mounting when no wall space is available.FeaturesColor• Standard: white, almond.• Optional (upcharge applicable): metallic silver, bronze, metallic charcoal, aluminum, semi-gloss black, sand.• Custom colors available upon request.Finish• Standard: epoxy/polyester powder paint.Voltage• 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.Construction• 18-gauge steel front cover.• High-limit temperature control with automatic reset.Fan• Factory-lubricated motor (open and ventilated).• 160 cfm fan (single unit: 55.5 dBA), 2 X 160 cfm fan (double unit: 58.5 dBA).• Fan delay purges heater of residual heat.Heating element• Durable tubular heating element with fins.Control• 240/208V control circuit standard with contactor when needed (except 120V model).• 24V relay, with or without transformer available.• Built-in thermostat available.Note: If an electronic thermostat is used, it must be compatible with forced-air heaters.Any remote thermostat or relay must be connected to the heater control terminal block.Installation• Maximum recommended installation height: 10 ft. (3 m).• Minimum clearance from adjacent walls: 10 in. (25.4 cm).• Adaptor for surface mounting available.• Adaptor for T-Bar ceiling available.Warranty• 3-year warranty against defects.Application• Apartment building, commercial building, drop ceiling, stairwell, garage.
ELSR-HA-10-1-BOT
型号:
ELSR-HA-10-1-BOT
品牌:
威力
产品分类:
其他风扇,热管理
描述:
Series OSRHAHigh Temperature Self-Regulating Heating Cable ELSR-HAThe HA line of self-regulating heating cables are designed for high process temperature maintain applications and are suitable for a wide range of industrial service. The cables are approved for use in hazardous and non-hazardous locations. The materials of construction chosen for the HA series provides maximum protection for service in the harshest environments.FeaturesOuter jacket• Fluoropolymer (BOT).Bus wire• Nickel plated copper.Minimum start-up temperature• -30 °C (-22 °F).Maximum operating temperature (power on)• 120 °C (248 °F).Maximum operating temperature (power off)• 150 °C (302 °F), continuous.• 200 °C (392 °F), power off for 1000 hr cumulative.Nominal voltage• 120V, 240V.Bending radius, min.• 25 mm (1 in.).Installation temperature, min.• -45 °C (-49 °F).Classification• II 2G Ex e IIC T3 Gb II 2D Ex tb IIIC.• T 80 °C Db.• Class I, Division 2, Groups A, B, C, D.• Class II, Division 2, Groups E, F, G.• Class III, T6.• Class I, Zone 1, AEx / Exe II, T6.• Class 1, Division 1, Groups B, C, D (Contact manufacturer).Standards• CSA C22.2.130.03; -WS.• CAN/CSA 60079-7:12, 60079-0-11.• ANSI/IEEE 515, 515.Certification• IECEx EPS 12.0006U.• 12ATEX1431U.• CSA C US 2547790Rating• Wet rated, for outdoor use (WS).Warranty• 1-year basic warranty on the heating cable.• 10-year limited warranty available.Application• Freeze protection, heat tracing instrumentation, pipes, vessel and tanks, chemical and petrochemical industries, food processing, automotive.
OAS10008T
型号:
OAS10008T
品牌:
威力
产品分类:
其他风扇,热管理
描述:
Series OASCommercial Industrial Suspended Unit HeaterColor• Standard: almond.Finish• Standard: epoxy/polyester powder paint.Voltage• 208V, 240V, 277V, 347V, 480V, 600V, 1 or 3-phase.• Some units may be field converted from 3 to 1-phase.Construction• 18 and 20-gauge steel.• Adjustable louvres to direct air flow.• High-limit temperature control with automatic reset.Fan• Motor mounted in cold compartment.• Thermally-protected motor.• Totally enclosed and factory-lubricated ball bearing motor (except for 15 to 25kW at 208/240V).• 58 dBA fan (2 to 10kW), 67 dBA fan (15 to 30kW) and 77 dBA fan (40 to 60kW).• Fan delay purges heater of residual heat.Heating element• Durable tubular heating elements; stainless steel (2 to 10kW); finned (15 to 60kW).• Concentric disposition of heating elements.• Factory sealed element upon request.Control• All models have a factory-installed contactor.• 240/208V control circuit standard (with transformer if necessary).• 24V relay, with or without transformer available.• Built-in thermostat available.• 120V control circuit available.Ouellet highly recommends to use a wall thermostat for greater comfort. Any remote thermostat or relay must be connected to the heater control terminal block.Installation• Horizontal wall or ceiling mounting using one of two supplied brackets which allow 360° rotation. (Horizontal mounting only for 40kW, 50kW and 60kW secured by 4 hooks [ceiling only].)• Vertical mounting using 4 threaded rods 1/2 in. X 13 UNC (not included) (except option -MD).• Diffuser cones available (except option -MD).• Large and easily accessible control compartment.• Maximum recommended height (horizontal): 2 to 10kW: 8 ft. (2.4 m); 15 to 30kW: 10 ft. (3 m); 40 to 60kW: 15 ft. (4.5 m).• Protective screen allows lower mounting height (except 40 to 60kW).• Minimum height of 8 ft. (2.4 m) for 40 to 60kW heaters.• 30 °C (85 °F) maximum operating ambient temperature.Warranty• 3-year warranty against defects.Application• Commercial hall, warehouse, stairwell, factory.
拍明芯城微信图标

各大手机应用商城搜索“拍明芯城”

下载客户端,随时随地买卖元器件!

拍明芯城公众号
拍明芯城抖音
拍明芯城b站
拍明芯城头条
拍明芯城微博
拍明芯城视频号