Hi,欢迎来到拍明芯城
| 购物车 (0) | 会员中心 | 在线客服 (86)400-693-8369
拍明芯城logo
0 卖盘信息
  • 搜买盘
搜索图标
购物车 0  
BOM询价
首页
特价专区
品牌
应用
原厂专区
产品文库
电子资讯
技术方案
资料中心
新手指引
投资者关系
您现在的位置： 首页 > 品牌信息 > NANOTEC

关于NANOTEC

NANOTEC

纳诺达克电子（常州）有限公司，成立于2007年，其母公司为德国Nanotec Electronics GmbH & Co.KG，总部位于慕尼黑附近的费尔德基兴市。Nanotec是世界领先的电机和电机控制器制造商，为客户提供高品质的驱动器解决方案。产品和技术主要用于工业自动化，实验室仪器和医疗器械等领域。
上一页 下一页
为您找到相关结果 49 条 7 /2
ZK-ZHR6-500
型号：
ZK-ZHR6-500
品牌：
纳诺达克
产品分类：
集成电路
描述：
DF45L024048-A2
型号：
DF45L024048-A2
品牌：
纳诺达克
产品分类：
集成电路
描述：
The DF45L024048-A2 is a 3-phase Flat Brushless DC Motor with 16-pole external rotor for smooth running and a long service life. The high energy permanent magnets allow high acceleration and speeds of up to 14000rpm with exceptional efficiency. The rotor position is reported electronically using three hall sensors offset by 120°. Optional encoders with up to 1000pulses/rev. allow high-resolution position controlling. The permanent magnets are located on the rotor bell revolving around the internal stator with the windings. In addition to the shorter design, the advantage of this construction compared to internal rotor motors comes from having the same output with a lower torque ripple due to the rotor"s higher inertia torque. . Linear torque curve . Significantly higher efficiency and power density than induction motors . Approximately 35% volume and weight reduction with the same output . Very long life span and smooth running with brushless technology and precision ball race . Reduced electrical interference emission along with excellent thermal properties . Mechanically interchangeable with stepper motors . Less construction expense and greater parts variety . Exceptionally large speed range at full motor output
L4118S1404-T5X5-A25
型号：
L4118S1404-T5X5-A25
品牌：
纳诺达克
产品分类：
集成电路
描述：
L2818L0604-T5X5-A50
型号：
L2818L0604-T5X5-A50
品牌：
纳诺达克
产品分类：
集成电路
描述：
SMCI35
型号：
SMCI35
品牌：
纳诺达克
产品分类：
集成电路
描述：
The SMCI35 is a Stepper Motor Controller with closed loop. This compact and high-performance stepper motor controller offers high functionality in a very small space. With the proven NanoPro software, it is possible to select between different modes and setting parameters, including the innovative, almost noise and resonance-free direct control of the stepper motors via the microcontroller in the dspDrive® procedure, in both open and closed loop operation. The motor controller with a continuous output of 4A (briefly up to 6A/phase) only needs a supply voltage of 12 to 48V and can thus replace much larger and also considerably more expensive devices in many applications. The SMCI35 motor controller cannot be networked, but merely parameterized with a special adapter via the USB interface. Numerous predefined operating modes (speed, positioning, flag position, clock-direction, analogue, etc.) are available that cover common applications. . TTL-RS232 (3.3V) Interface . 6 Digital inputs (TTL), 1 analogue input +10/-10V . 3 Digital outputs (TTL) outputs . Depending on encoder position can be monitored
DF45S024050-A2
型号：
DF45S024050-A2
品牌：
纳诺达克
产品分类：
电机-AC,DC
描述：
BLDC MOTOR, 24VDC, 6500RPM
L4118L1804-T6X2-A50
型号：
L4118L1804-T6X2-A50
品牌：
纳诺达克
产品分类：
集成电路
描述：
ST2818S1006-B
型号：
ST2818S1006-B
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST2818S1006-B is a 2-phase Stepper Motor offers reliable, economical drives with a long service life. It provides high step angle precision and step resolution. Stepper motors are strong when a high torque is required at speeds of less than 2000rpm. It is suitable for applications in which high precision, small dimensions, fast speed are required. Because of the standardised shaft diameter of 5mm, an encoder can be installed in the double shaft version for position monitoring. This stepper motor is ideal for applications such as laboratory analysis equipment. . Miniature high torque stepper motor . Double shaft motor . 5Ncm Holding torque . 1.1mH Inductivity per winding
ST4118L1804-A
型号：
ST4118L1804-A
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST4118L1804-A is a 2-phase Stepper Motor offers reliable, economical drives with a long service life. It provides high step angle precision and step resolution. Stepper motors are strong when a high torque is required at speeds of less than 2000rpm. The smallest size ST2818 stepper motor is suitable for applications in which high precision, small dimensions, fast speed and long service life are required. Because of the standardised shaft diameter of 5mm, an encoder can be installed in the double shaft version for position monitoring. . Miniature high torque stepper motor . Single shaft motor . 50Ncm Holding torque . 3.3mH Inductivity per winding
L4118S1404-T5X5
型号：
L4118S1404-T5X5
品牌：
纳诺达克
产品分类：
集成电路
描述：
L4118S1404-T6X2-A25
型号：
L4118S1404-T6X2-A25
品牌：
纳诺达克
产品分类：
集成电路
描述：
L4018S1204-M6X1
型号：
L4018S1204-M6X1
品牌：
纳诺达克
产品分类：
集成电路
描述：
The L4018S1204-M6X1 is a Linear Driver with fine bushing that is integrated in the motor can convert the rotating movement into linear movement without expensive construction. This compact design therefore makes it possible to provide a linear adjusting facility that saves space and weight, which is achieved by the LP at extremely low cost with regard to power and speed. Simple linear adjustment tasks can be achieved with precision adjustment in combination with the IMT micro-step driver. . Simple and flexible motor design . Stroke-independent movement to any position . Provides a rigid and lightweight mechanical system . Partially self-inhibiting, therefore no additional brake required . Hydraulic and pneumatic cylinders with considerably more flexibility . Direct force coupling into the load does not require any additional components . Even large amounts of force can be precisely controlled with minimal energy requirement . Extremely dynamic and rigid machine designs and multi-motor operation are possible with fixed shaft
L5918L3008-T10X2-A50
型号：
L5918L3008-T10X2-A50
品牌：
纳诺达克
产品分类：
集成电路
描述：
L4118S1404-T6X2
型号：
L4118S1404-T6X2
品牌：
纳诺达克
产品分类：
集成电路
描述：
ST4118D3004-A
型号：
ST4118D3004-A
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST4118D3004-A is a 2-phase Stepper Motor offers reliable, economical drives with a long service life. It provides high step angle precision and step resolution. Stepper motors are strong when a high torque is required at speeds of less than 2000rpm. The smallest size ST2818 stepper motor is suitable for applications in which high precision, small dimensions, fast speed and long service life are required. Because of the standardised shaft diameter of 5mm, an encoder can be installed in the double shaft version for position monitoring. . Miniature high torque stepper motor . Single shaft motor . 50Ncm Holding torque . 3.3mH Inductivity per winding
ST6318F1004-A
型号：
ST6318F1004-A
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST6318F1004-A is a 2-phase Stepper Motor offers reliable, economical drives with a long service life. It provides high step angle precision and step resolution. Stepper motors are strong when a high torque is required at speeds of less than 2000rpm. The Ultra-flat (only 10mm high) stepper motor with a 63mm diameter, high torque and speeds up to 5000rpm. Because of its size and high speed, this stepper motor is used for feeder applications or in stirrers. . High torque stepper motor . Single shaft motor . 6Ncm Holding torque . 2mH Inductivity per winding
SP2575M0206-A
型号：
SP2575M0206-A
品牌：
纳诺达克
产品分类：
集成电路
描述：
The SP2575M0206-A from Nanotec is a two phase, unipolar/bipolar 1 winding permanent magnet stepper motor. This motor is economical and designed for simple device applications where large step angles are required. . Motor supply voltage is 12VDC . Step angle of 7.5° . Product weight of 0.036Kg . Class B insulation . Ambient temperature of -20°C to 50°C . Dielectric strength of 500VAC/1minute
ZK-RS232-USB-3.3V
型号：
ZK-RS232-USB-3.3V
品牌：
纳诺达克
产品分类：
集成电路
描述：
L4118L1804-T6X2
型号：
L4118L1804-T6X2
品牌：
纳诺达克
产品分类：
集成电路
描述：
ZK-SMCI12
型号：
ZK-SMCI12
品牌：
纳诺达克
产品分类：
集成电路
描述：
DB59C024035-A
型号：
DB59C024035-A
品牌：
纳诺达克
产品分类：
电机-AC,DC
描述：
BLDC MOTOR, 24VDC, 4500RPM
L4118L1804-T5X5-A50
型号：
L4118L1804-T5X5-A50
品牌：
纳诺达克
产品分类：
集成电路
描述：
The L4118L1804-T5X5-A50 is a Linear Actuator with lead screw and linear slide, highly precise feeding can be achieved using these motors without requiring additional mechanical components. These motors can also be interchanged with standard 42mm stepper motors and linear actuators. The combination of a high-torque stepper motor with a high-pitch screw not only gives the linear actuators of the L41 series an extremely high positioning speed (and extremely short positioning times) but, in its compact form, also enables high thrust and drag forces. . Simple and flexible motor construction . Stroke-independent movement to any position . Direct force coupling to the load requires no additional components on the linear drive . Due to the low energy requirements, even high forces can be delicately regulated . Partly self-locking so no additional brake is necessary . Substitute for hydraulic and pneumatic cylinders and offer considerably higher flexibility . Static screws enable highly dynamic and rigid machine constructions and multi-motor operation
ST2818M1006-B
型号：
ST2818M1006-B
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST2818M1006-B is a 950mA 12VDC 2-phase high torque two-shaft Stepper Motor with bipolar and unipolar coil winding, 3.4R resistance, 1.2mH inductance and 7.5Ncm torque. This stepper motor is ideal for laboratory analysis equipment applications. . 4.1 x 10³lbs-inch² Rotor inertia . -10 to 50°C Ambient temperature range
SP3575M0906-A
型号：
SP3575M0906-A
品牌：
纳诺达克
产品分类：
集成电路
描述：
The SP3575M0906-A from Nanotec is a two phase, unipolar/bipolar-1 winding permanent magnet stepper motor. This motor is economical and designed for simple device applications where large step angles are required. . Motor supply voltage is 5VDC . Step angle of 7.5° . Product weight of 0.09Kg . Class E insulation . Ambient temperature of -10°C to 40°C . Dielectric strength of 500VAC/1minute
L2818S0604-T5X5
型号：
L2818S0604-T5X5
品牌：
纳诺达克
产品分类：
集成电路
描述：
The L2818S0604-T5X5 from Nanotec is a two phase, linear actuator with lead screw. This is a high torque stepper motor with a high pitch screw not only gives the L28 linear actuators an exceptionally high positioning speed (and extremely short positioning times) in its compact form but also enables large thrust and drag forces. . 5.6ohm resistance per winding . 0.11Kg of weight . 25µm/step resolution . Class B insulation . Ambient temperature of -10°C to 50°C . Dielectric strength of 500VAC/1minute . 20mm bushing length
LS4118S1404-T6X2-75
型号：
LS4118S1404-T6X2-75
品牌：
纳诺达克
产品分类：
集成电路
描述：
ST5918L3008-B
型号：
ST5918L3008-B
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST5918L3008-B is a 2-phase Stepper Motor offers reliable, economical drives with a long service life. It provides high step angle precision and step resolution. Stepper motors are strong when a high torque is required at speeds of less than 2000rpm. The smallest size ST2818 is suitable for applications in which high precision, small dimensions, fast speed and long service life are required. Because of the standardised shaft diameter of 5mm, an encoder can be installed in the double shaft version for position monitoring. . Miniature high torque stepper motor . Dual shaft motor . 140Ncm Holding torque . 2.2mH Inductivity per winding
SMCI12
型号：
SMCI12
品牌：
纳诺达克
产品分类：
集成电路
描述：
The SMCI12 is a Stepper Motor Drive, Positioning Controller. It is a cost-effective power module for series use. The motor controller makes numerous options available that would otherwise be associated with considerably larger space requirements and higher costs. Because of the ballast switching integrated in the motor controller, an external capacitor is often not necessary. Software-based dspDrive® current controller for optimal operating behaviour at all speeds. RS485 - Position, speed, flag position, clock direction, analogue, joystick. CANopen - Position, speed, reference run, interpolated position (according to CAN standard DS402). . Adjustable 0 to 150% current reduction . RS485 4-wire or CANopen interface . -0 to 40°C Operating temperature
ZIB-PDX-N
型号：
ZIB-PDX-N
品牌：
纳诺达克
产品分类：
集成电路
描述：
ST4118X1404-A
型号：
ST4118X1404-A
品牌：
纳诺达克
产品分类：
集成电路
描述：
The ST4118X1404-A is a 2-phase Stepper Motor offers reliable, economical drives with a long service life. It provides high step angle precision and step resolution. Stepper motors are strong when a high torque is required at speeds of less than 2000rpm. The smallest size ST2818 stepper motor is suitable for applications in which high precision, small dimensions, fast speed and long service life are required. Because of the standardised shaft diameter of 5mm, an encoder can be installed in the double shaft version for position monitoring. . Miniature high torque stepper motor . Single shaft motor . 9Ncm Holding torque . 1.6mH Inductivity per winding
每页显示 条
第一页 上一页 [ 1 ] [ 2 ] 下一页 共2 页 最后一页
拍明芯城logo
购物指南
客户须知
交易须知
常见问题
​用户服务协议
支付与配送
汇款须知
其他支付
配送须知
关税须知
售后服务
收货验货
退换货流程
服务投诉
发票须知
特色服务
免费入驻
实用工具
报关报检
关于拍明芯城
关于我们
投资者关系
联系我们
加入拍明芯城
拍明芯城微信图标

各大手机应用商城搜索“拍明芯城”

下载客户端，随时随地买卖元器件！

拍明芯城公众号
拍明芯城抖音
拍明芯城b站
拍明芯城头条
拍明芯城微博
拍明芯城视频号
产品型号索引:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0
1
2
3
4
5
6
7
8
9
电子百科 网站地图 友情链接 产品词库 全部标签 文库型号
Copyright 2012- 2022 拍明芯城ICZOOM.com 版权所有 客服热线：400-693-8369 (9:00-18:00) 营业执照
工商网监 EDI ICP 网络警察提醒您 网上有害信息举报专区 网络举报app下载