描述：
详细描述,The RF2056 is a low power, high performance, VHF/UHF frequency conversion chip with integrated local oscillator (LO) generation and a pair of mixers. The synthesizer includes an integrated fractional-N phase locked loop that can control the VCO to produce a low phase noise and low spurious LO signal with very fine frequency resolution. The VCO output can then be divided by one, two, or four in the LO divider, the output of which drives the mixer, which converts the signal into the required frequency band. The mixer bias current can be programmed dependent on the required performance and available supply current. The LO generation block has been designed to operate with the VCO covering the frequency range from 200 MHz to 500 MHz, dependant on the value of the external inductor used. With the LO dividers, the LO range achievable is within the range of 50 MHz to 500 MHz. The mixer is broadband and can operate from 30 MHz to 500 MHz at the input and output, enabling both up and down conversion. An external crystal of between 10 MHz and 26 MHz, or an external reference source of between 10 MHz and 104 MHz, can be used with the RF2056 to accommodate a variety of reference frequency options.,All on-chip registers are controlled through a simple three-wire serial interface. The RF2056 is designed for 2.7 V to 3.6 V operation. It is available in a plastic 32-pin, 5 mm x 5 mm QFN package.,特点,Fractional-N Synthesizer,Very Fine Frequency Resolution 1.5 Hz for 26 MHz Reference,LO Frequency Range Between 50 MHz and 500 MHz,Low Phase Noise VCO,VCO Range 200 MHz to 500 MHz,Dependent on External Inductor,Integrated LO Buffers and LO Dividers,On-Chip Crystal-Sustaining?Circuit With Programmable?Loading Capacitors,Two High-Linearity RF Mixers,Mixer Frequency Range 30 MHz to 500 MHz,Mixer Input IP3 +25 dBm,Mixer Bias Adjustable for Low Power Operation,2.7 V to 3.6 V Power Supply,Low Current Consumption 45 mA to 65 mA at 3 V,3-Wire Serial Interface
产品分类
信号调整器
2012- 2022 拍明芯城ICZOOM.com 版权所有 客服热线：400-693-8369 (9:00-18:00)
