0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >工业控制 > TI ADS1248 24位精密ADC传感器应用评估方案

TI ADS1248 24位精密ADC传感器应用评估方案

来源: eccn
2020-02-25
类别:工业控制
eye 127
文章创建人 拍明

原标题:TI ADS1248 24位精密ADC传感器应用评估方案

  TI 公司的ADS1246, ADS1247和ADS1248是高度集成的24位精密ADC,集成了低噪音可编程增益放大器(PGA),带单周期设定数字滤波器的精密Delta-Sigma ADC以及振荡器,组成了完整的温度/桥式传感器应用包括热耦合,电热调节器,RTD和应力测量的前端解决方案.本文介绍了ADS1246, ADS1247和ADS1248主要特性,以及ADS1248EVM评估板的主要特性,详细电路图和材料清单(BOM).

  The ADS1246, ADS1247, and ADS1248 are highly-integrated, precision, 24-bit analog-to-digital converters (ADCs). The ADS1246/7/8 feature an onboard, low-noise, programmable gain amplifier (PGA), a precision delta-sigma ADC with a single-cycle settling digital filter, and an internal oscillator. The ADS1247 and ADS1248 also provide a built-in, very low drift voltage reference with 10mA output capacity, and two matched programmable current digital-to-analog converters (DACs). The ADS1246/7/8 provide a complete front-end solution for temperature/bridge sensor applications including thermal couples, thermistors, RTDs, and strain-gauge applications.

  An input multiplexer supports four differential inputs for the ADS1248, two for the ADS1247, and one for the ADS1246. In addition, the multiplexer has a sensor burnout detect, voltage bias for thermocouples, system monitoring, and general-purpose digital I/Os (ADS1247 and ADS1248). The onboard, low-noise PGA provides selectable gains of 1 to 128. The delta-sigma modulator and programmable digital filter settle in only one cycle, for fast channel cycling when using the input multiplexer, and support data rates up to 2kSPS. For data rates of 20SPS or less, both 50Hz and 60Hz interference are rejected by the filter.

  The ADS1246 is offered in a small TSSOP-16 package, the ADS1247 is available in a TSSOP-20 package, and the ADS1248 in a TSSOP-28 package. All three devices are specified over the extended temperature range of –40℃ to +105℃.

  ADS1248主要特性:

  24 Bits, No Missing Codes

  Data Output Rates Up to 2kSPS

  Single-Cycle Settling for All Data Rates

  Simultaneous 50/60Hz Rejection at 20SPS

  4 Differential/7 Single-Ended Inputs (ADS1248)

  2 Differential/3 Single-Ended Inputs (ADS1247)

  Low-Noise PGA: 48nV at PGA = 128

  Matched Current Source DACs

  Very Low Drift Internal Voltage Reference: 10ppm/℃ (max)

  Sensor Burnout Detection

  4/8 General-Purpose I/Os (ADS1247/48)

  Internal Temperature Sensor

  Power Supply and VREF Monitoring

  Self and System Calibration

  SPI-Compatible Serial Interface

  Unipolar (+3.3V to +5V)/Bipolar (±2.5V) Operation

  Digital Supply: +3.3V or +5V

  Operating Temperature –40℃ to +125℃

  ADS1248应用:

  Temperature Measurement

  RTDs, Thermocouples, and Thermistors

  Pressure Measurement

  Industrial Process Control

  

  图1.ADS1247/8方框图

  

  图2.硬件补偿的三线RTD应用框图

  ADS1248EVM评估板

  ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK

  This users guide describes the characteristics, operation, and use of the ADS1148EVM and ADS1248EVM, both by themselves and as part of the ADS1148EVM-PDK or DS1248EVM-PDK. These evaluation modules (EVMs) are evaluation boards for the ADS1248, a 24-bit, multi-channel, delta-sigma analog-to-digital converter (ADC), and the ADS1148, a 16-bit version of the ADS1248. This EVM allows evaluation of all aspects of the ADS1148 or ADS1248 devices. Complete circuit descriptions, schematic diagrams, and bills of material are included in this document.

  For use with a computer, the ADS1148EVM-PDK or ADS1248EVM-PDK is available. This kit combines the ADS1148/ADS1248EVM board with the MSP430-based MMB3 motherboard, and includes ADCPro software for evaluation.

  The MMB3 motherboard allows the ADS1148/ADS1248EVM to be connected to the computer via an available USB port. This manual shows how to use the MMB3 as part of the

  ADS1148EVM-PDK/ADS1248EVM-PDK, but does not provide technical details about the MMB3 itself.

  

  图3. ADS1248EVM (左)和ADS1248EVM-PDK (右)外形图

  The ADS1248EVM is an evaluation module built to the TI Modular EVM System specification. It can be connected to any modular EVM system interface card.

  The ADS1248EVM is available as a stand-alone printed circuit board (PCB) or as part of the ADS1248EVM-PDK, which includes an MMB3 motherboard and software. As a stand-alone PCB, the ADS1248EVM is useful for prototyping designs and firmware.

  Note that the ADS1248EVM has no microprocessor and cannot run software. To connect it to a computer, some type of interface is required.

  ADS1148EVM/ADS1248EVM 主要特性:

  Contains all support circuitry needed for the ADS1148/ADS1248

  2.5V and +5V power-supply options for ADC

  Voltage reference options: external or onboard

  GPIO access

  Compatible with the TI Modular EVM System

  ADS1148EVM-PDK/ADS1248EVM-PDK 主要特性:

  Easy-to-use evaluation software for Microsoft Windows XP

  Data collection to text files

  Built-in analysis tools including scope, FFT, and histogram displays

  Complete control of board settings

  Easily expandable with new analysis plug-in tools from Texas Instruments

  

  图4.ADS1148EVM和 ADS1248EVM电路图

  ADS1148EVM/ADS1248EVM 材料清单:

  

  



责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案