0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >智能家居 > 基于Cypress S6AL211四路40W LED智能照明系统解决方案

基于Cypress S6AL211四路40W LED智能照明系统解决方案

来源: eccn
2019-09-19
类别:智能家居
eye 183
文章创建人 拍明

原标题:Cypress S6AL211四路40W LED智能照明系统解决方案

  cypress公司的S6AL211是用于智能照明的四路LED驱动器,为商业照明,住宅照明和其它照明系统提供最优化的解决方案.输入电压VIN DC 24V,输出功率72W,效率大于 94 %.器件可依靠通信以及各种感应器来对应调光和调色,削减BOM 成本.本文介绍了S6AL211主要特性,框图和应用框图和电路,以及40W智能LED 驱动板S6SAL211A94SA1001主要指标,电路图,材料清单和PCB设计图.

  There are possible to the light dimming and tune colors control of 4 ch. LED strings. This device can be dimming and toning for 4 ch.LEDs. The dimming and color control is corresponded to communication interfaces and sensors. Through it can use for not only thegeneral lighting but also office, shop and residence lighting control systems. Moreover, S6AL211 series integrate a 3V-LDO regulatorcircuit for supplying the power to the peripheral circuits. It contributes to the BOM cost reduction. S6AL211 series can offer the bestsolution according to your usage.

  S6AL211主要特性:

   Control of up to 4 channels LED strings (such as Red, Green, Blue, White or White×4 etc.)

   Input voltage range VIN: DC 24 V (Absolute Maximum rating: 35 V)

   Output power range: 72 W (1A/18 V at LED Vf 3.6 V(typ)×5 / 1 ch. )

   LED brightness control method: LED current control and LED ON/OFF PWM control

   LED constant current control method: Based on Buck DC/DC converter

   High efficiency > 94 % (Dimming type B,C at 4 ch. 100 % brightness, Typ-sample)

   Communication interfaces: DALI, External module of Bluetooth® (UART)

   Integrates 3V-LDO regulator circuit for supplying the power to the peripheral circuits

   Protection functions

   Output signal of IC protection status

   Low input voltage protection

   Output over current protection, etc.

   Small package: 48-pin, LQFP (7.0 mm × 7.0 mm× 1.7 mm [Max])

  S6AL211应用:

   Commercial lightings such as office, shop and so on

   Residential lighting such as down-light, ceiling-light

   Street light, Sensor light

   Illumination

  etc.

   Supported to the standards:

  Japanese Electrical Appliances and Materials Safety Law (PSE)

  Japanese lamp industrial standard (JEL)

  图1.S6AL211简化框图(样本1)

  图2.S6AL211简化框图(样本2)

  图3.S6AL211简化框图(样本3)

  图4.S6AL211框图

  40W智能LED 驱动板S6SAL211A94SA1001

  40W智能LED 驱动板主要指标:

  图7.40W智能LED 驱动板外形图

  40W智能LED 驱动板材料清单:



责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯