基于IDT公司P9221-R 15W无线电源接收解决方案
原标题:IDT P9221-R 15W无线电源接收解决方案
IDT公司的P9221-R是高度集成WPC-1.2.2兼容的15W无线电源接收器,采用磁感器充电技术,接收器把谐振回路的交流(AC)电源转换成电压9V和12V的稳压DC输出.接收器包括一流的32位ARM® Cortex®-M0处理器,和发送器P9242-R一起可组成完整的无线电源系统(15W),DC对DC效率高达87%,支持I2C接口,主要用在快充手机,平板电脑,电源配件和医疗电子.本文介绍了P9221-R主要特性,功能框图,应用电路以及15W评估板P9221-R-EVK主要特性,电路图,材料清单和PCB设计图.
The P9221-R is a high efficiency, Qi-compliant wireless powerreceiver targeted for applications up to 15W. Using magneticinductive charging technology, the receiver converts an AC powersignal from a resonant tank into a regulated DC output voltagesetting with 9V and 12V. The integrated, low RDS (ON) synchronousrectifier and ultra-low dropout offer high efficiencymaking the product ideally suited for battery-operated applications.
The P9221-R includes an industry-leading 32 bit ARM® Cortex®-M0 processor offering a high level of programmability. In addition,the device features proprietary alignment guide information foroptimum coupling between the receiver and the transmitter, aprogrammable current limit, and a patented over-voltage protectionscheme eliminating the need for additional capacitorsgenerally used by the receivers, minimizing the external
component count and cost. Together with the P9242-R transmitter(TX), the P9221-R is a complete wireless power system solutionfor power applications up to 15W.
The P9221-R is available in a 52-WLCSP package and it is ratedfor a 0 to 85°C ambient operating temperature range.
P9221-R主要特性:
Single-chip solution supporting up to 15W applications
WPC-1.2.2 compliant
Patented over-voltage protection clamp eliminating externalcapacitors
87% peak DC-to-DC efficiency with P9242-R TX
Proprietary coil alignment guide
Full synchronous rectifier with low RDS(ON) switches
Programmable output voltage: 9V and 12V
Embedded 32-bit ARM® Cortex®-M0 processor
Dedicated remote temperature sensing
Power transfer LED indicator
Programmable current limit
Active-low enable pin for electrical on/off
Open-drain interrupt flag
Supports I2C interface
0 to +85°C ambient operating temperature range
52-WLCSP (2.64x3.94 mm; 0.4mm pitch)
P9221-R典型应用:
Fast charge cellphone
Tablets
Accessories
Medical
图1.P9221-R功能框图
图2.P9221-R应用电路
15W评估板P9221-R-EVK
The P9221-R-EVK is a turnkey 15 Watt, Qi-compliant wireless power receiver reference kit for fast prototyping and design integration. The kit consists of an easy-to-use reference board and comprehensive support collateral that significantly eases design-in effort and minimizes time-to-market.
An associated layout module enables direct instantiation on to a system board, while an optimized and fully-tested Bill-of-Materials (BOM) takes the guess-work out of component selection. The P9221-R based solution is well-suited for a wide range of applications, including Tablets, furniture, medical devices, and other portable devices still hindered by traditional contact-based charging bases or cables.
图.评估板P9221-R-EVK外型图
评估板P9221-R-EVK主要特性:
Supports up to 15W
WPC 1.2.2 (Qi) compliant for interoperability w/ other devices
Programmable output voltage - 9 or 12V
Patented over-voltage protection clamp eliminating external capacitors
Proprietary coil alignment guide
Embedded 32 bit ARM® Cortex®-M0 processor
Compact form factor for fast prototyping
Layout module provided for direct copy to system board
Optimized PCB reference layout and fully-tested BOM
High-quality receiver coil by Amotech
Supported by extensive library of digital support collateral (see below)
P9221-R MM评估板V2.1材料清单:
图.15W无线电源发送板和接收板外形图
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。