0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >消费电子 > 基于Maxim公司MAX77812四相大电流降压稳压器解决方案

基于Maxim公司MAX77812四相大电流降压稳压器解决方案

来源: 中电网
2018-06-25
类别:消费电子
eye 417
文章创建人 拍明

原标题:Maxim MAX77812四相大电流降压稳压器解决方案

  Maxim公司的MAX77812是四相大电流降压稳压器,输入电压从2.5V到5.5V,输出电压从0.25V到1.525V,每步5mV,最大输出电流20A,DC输出电压精度±0.5%, 3.8VIN, 1.1VOUT,L = 220nH (9mΩ DCR)时的峰值效率91%,主要用在智能手机和平板电脑,游戏控制台,DSLR照相机,无人驾驶飞机,微处理器(CPU/GPU)和FPGA以及通信模块.本文介绍了MAX77812主要优势和特性,框图,应用框图以及评估板MAX77812 EVK主要特性,电路图,材料清单和PCB设计图.

  The MAX77812 is a quad-phase, high-current, buck regulator for multicore applications processors in the lat­est smart phones and tablets. The MAX77812 achieves world-class transient response with miniature PCB foot­print through the use of small inductors and output capaci­tors. Differential remote sense feedback enables tight DC and AC accuracy at the point of load. The MAX77812’s flexible architecture allows user-selectable phase configu­rations such as 4, 3 + 1, 2 + 2, 2 + 1 + 1, and 1 + 1 + 1 + 1.

  Programmable current limit minimizes inductor size given the system’s actual requirements. Programmable soft-start ramp rate, rising and falling ramp rates, and startup operation provide control over inrush current as the regulator transitions between operating states. An output voltage range of 0.25V to 1.525V supports a wide range of application processors, down to the lowest power retention states.

  Multifunction general-purpose inputs and high-speed serial interface provide flexible enable control of each regulator, DVS operation, and output voltage ramp rate control that enables rapid output voltage adjustment to optimize performance in all system operating states.

  The MAX77812 features I2C-compatible, 2-wire serial interface consisting of a bidirectional serial data line (SDA) and a serial clock line (SCL). The MAX77812 I2C supports SCL clock rates up to 3.4MHz. The MAX77812 I2C can be configured as a 26MHz (typ) SPI interface by I2C_SPI_SEL input pin.

  The MAX77812 is available in a 64-bump 0.4mm pitch WLP package with a maximum height of 0.8mm

  MAX77812主要优势和特性:

  20A Maximum Output Current

  2.5V to 5.5V Input Voltage Range

  Output Voltage Range from 0.25V to 1.525V in 5mV Steps

  ±0.5% Typical DC Output Voltage Accuracy

  91% Peak Efficiency at 3.8VIN, 1.1VOUT,L = 220nH (9mΩ DCR)

  Enhanced Load Transient Response

  Programmable Ramp-Up and Ramp-Down Slew Rate

  Auto (SKIP/PWM) or Forced PWM Modes

  User-Selectable Phase Configurations

  Multifunction General-Purpose Inputs

  Watchdog Timer Reset Input

  Interrupt Output for Status and Fault Conditions

  High-Speed (Up to 3.4MHz) I2C Serial Interface with an Option for 30MHz SPI Interface

  MAX77812应用:

  Smartphones and Tablets

  Game Consoles

  DSLR Cameras

  Drones

  Micro Processors (CPU/GPU) and FPGAs

  Communication Modules

  图1.MAX77812简化框图

  评估板MAX77812 EVK

  The MAX77812 evaluation kit (EV kit) is a fully assembled and tested printed circuit board (PCB) that demonstrates the MAX77812. The EV kit allows for easy evaluation of each feature. It supports user-programmable phase con­figuration to one of five options:

  Single output in 4 phase configuration (default)

  Dual outputs in 3 + 1 phase configuration

  Dual outputs in 2 + 2 phase configuration

  Three outputs in 2 + 1 + 1 phase configuration

  Four outputs in 1 + 1 + 1 + 1 phase configuration

  A Micro-B USB cable is included in the package to serve as the USB to I2C interface for easy testing. Windows®- based software provides a user-friendly interface to exer­cise the features of the MAX77812. This software offers a graphical user interface (GUI) as well as a register-based interface.

  评估板MAX77812 EVK主要特性:

  20A Maximum Output Current

  2.5V to 5.5V Input Voltage Range

  Output Voltage Range from 0.25V to 1.525V in 5mV Steps

  ±0.5% (typ) DC Output Voltage Accuracy

  91% Peak Efficiency at 3.8VIN 1.1VOUT, L = 220nH (9mΩ DCR)

  Enhanced Load Transient Response

  Programmable Ramp-Up and Ramp-Down Slew Rate

  Auto (SKIP/PWM) or Forced PWM Modes

  User-Selectable Phase Configurations

  Multifunction General-Purpose Inputs

  Watchdog Timer Reset Input

  Interrupt Output for Status and Fault Conditions

  High-Speed (Up to 3.4MHz) I2C Serial Interface with an Option for 30MHz SPI Interface

  图.评估板MAX77812 EVK外形图

  评估板MAX77812 EVK材料清单:

  详情请见:

MAX77812EVKIT.pdf

MAX77812.pdf


责任编辑:Davia

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案