基于Microchip公司的CAN LIN CAN-FD汽车网络开发方案
原标题:MicrochipCAN LIN CAN-FD汽车网络开发方案
microchip公司的CAN LIN CAN-FD汽车网络开发板采用8位,16位和32位Microchip MCU系列,提供低成本模块化平台,用于CAN, LIN, CAN-FD网络开发.具有四个mikroBUS™插座,支持CAN和CAN-FD. 7-30V DC电源输入给整个板提供+3.3V和+5V稳压电源.本文介绍了汽车网络开发板主要特性,框图和电路图.
The CAN, LIN, CAN-FD Automotive Networking Development Board provides alow-cost modular platform for CAN, LIN, CAN-FD network development using 8-bit,16-bit, and 32-bit Microchip microcontroller families. It features four mikroBUS™headers to accommodate a variety of plug-in Click™ Board combinations for LIN, CAN,and CAN-FD development. The Automotive Networking Development Board supportsCAN and CAN-FD natively. The CAN digital connection from the microcontrollerconnects to the TX/RX connection on the mikroBUS™ header. This connectionsupports the CAN and CAN-FD Transceiver Click™ boards without having to lose themicrocontroller UART connection to the other mikroBUS™ headers.
图1.汽车网络开发板外形图
The board includes the key features mentioned below, as indicated in the diagram:
1.100-pin PIM header, compatible with the PIM versions of selected PIC® MCUand dsPIC® DSC devices
2.Direct 7-30V DC power input that provides +3.3V and +5V (regulated) to theentire board
3.Power indicator LED will represent what voltage is applied to the processor PIM.
4.USB connector for connectivity with MCUs that have a USB module
5.Standard 6-wire In-Circuit Debugger (ICD) connector for connections to anMPLAB® ICD programmer/debugger module
6.Push button switches for device Reset and user-defined inputs
7.Potentiometer for analog input
8.Eight indicator LEDs
9.Edge connector for PICtail™ Plus card compatibility
10.Six-pin interface for the PICkit™ Programmer
11.Two Pmod interfaces
12.Four mikroBUS™ headers
图2.汽车网络开发板正面图
详情请见:
责任编辑:Davia
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。