模块板卡:HDMI转EDP驱动板
应用领域:智能家电
方案类型:模块板卡
主控芯片:SY
方案概述
产品功能:HDMI转EDP
分辨率:最高支持4K
应用产品:POS机,收银机,广告机
优势:尺寸小,成本低
【相关信息】HDMI转EDP转接芯片:NCS8803
1、功能:HDMI转EDP 带Scaler
2、分辨率:2560*1600
3、封装:QFN-56
HDMI-to-eDP Converter w/ scaler
1 Features
Embedded-DisplayPort (eDP) Output 1/2/4-lane eDP @ 1.62/2.7Gbps per lane HD to WQXGA (2560*1600) supported Up to 6dB pre-emphasis
HDMI Input
HDMI 1.4a supported RGB444/YCbCr444/YCbCr422 supported Pixel clock up to 340MHz 2-channel audio supportedSupport Hot-Plug Detect
Adaptive equalization
Reference Clock
Any freq. between 19MHz and 100MHz Crystal or single-ended clock input Built-in 5000ppm SSC generator
Misc
I2C for chip configuration Built-in eDP handshake protocol I2C-AUX channel for TCON/DPCD/EDID control Built-in video test pattern
Power
1.2V core supply 2.5V or 3.3V IO supply Power consumption ~ 150mW @ 2560*1600*24bit*60Hz Deep-sleep mode power <1mW
Package
QFN-56 (7mm x 7mm) package RoHS Compliant Sample available now
2 Block Diagram
3 General Description
NCS8803 is a low-power HDMI-to-DisplayPort/eDP converter with advanced scaling function,fractional scaling ratio from 2:1 to 1:2, which is designed for mobile devices including tablets,laptops, monitor, etc. to support high-definition DP/eDP displays.NCS8803 supports 4-lane DP/eDP output which is typically required to support WQXGA
(2560*1600) and above at 60Hz frame rate.
Thanks to our proprietary scaling algorithm, NCS8803 provides high picture quality. All the functions pack into a small 7mm*7mmQFN56 package which saves the precious space inmobile devices.
4 Pin Diagram
责任编辑:Davia
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。