0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >新能源 > ST SPV1020 太阳能电池DC-DC电源转换方案

ST SPV1020 太阳能电池DC-DC电源转换方案

来源: eccn
2019-11-28
类别:新能源
eye 185
文章创建人 拍明

原标题:ST SPV1020 太阳能电池DC-DC电源转换方案

  ST 公司的SPV1020是内置了MPPT算法的PWM模式DC/DC升压转换器,能最大化太阳能电池板所产生的能量,不受温度和太阳辐射的影响。MPPT算法精度在0.2%,工作电压0-36V,具有过压,过流和超温保护,内置了软起动,效率高达98%。本文介绍了SPV1020主要特性,方框图和应用电路。

  Interleaved DC-DC boost converter with built-in MPPT algorithm SPV1020 is a monolithic DC-DC boost converter designed to maximize the power generated by photovoltaic panels independently of temperature and amount of solar radiation.

  The optimization of the power conversion is obtained with an embedded logic which performs the MPPT (max power point tracking) algorithm on the PV cells connected to the converter.

  One or more converters can be housed in the connection box of PV panels, replacing the bypass diodes, and thanks to the fact that the maximum power point is locally computed, the efficiency at system level will be higher than the one of conventional topologies, where the MPP is computed in the main centralized inverter.

  For a cost effective application solution and miniaturization needs, SPV1020 embeds the power MOSFETs for active switches and synchronous rectification, minimizing the number of external devices. Furthermore, the 4 phase interleaved topology of the DC-DC converter allows to avoid the use electrolytic capacitors, which would severely limit the lifetime.

  It works at fixed frequency in PWM mode, where the duty cycle is controlled by the embedded logic running a Perturb&Observe MPPT algorithm. The switching frequency, internally generated and set by default at 100 kHz, is externally tunable, while the duty cycle can range from 5% to 90% with a step of 0.2%.

  Safety of the application is guaranteed by stopping the drivers in case of output over-voltage or overtemperature.

  SPV1020主要特性:

  ■ PWM mode DC-DC boost converter

  ■ Duty cycle controlled by MPPT ALGORITHM with 0.2% accuracy

  ■ Operating voltage range 0-36 V

  ■ Overvoltage, overcurrent, overtemperature protections

  ■ Built in soft-start

  ■ Up to 98% efficiency

  ■ Automatic transition to burst mode for improved efficiency at low solar radiation

  ■ SPI interface

  SPV1020应用:

  ■ Photovoltaic panels

  

  图。SPV1020应用电路



责任编辑:David

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯