Avago公司ACPL-38JT汽车IGBT 2.5A栅极驱动方案
原标题:Avago ACPL-38JT汽车IGBT 2.5A栅极驱动方案
Avago公司的ACPL-38JT是汽车IGBT用栅极驱动光耦器,输出电流2.5A,集成了去饱和(VCE)检测和故障状态反馈,满足汽车电子AEC-Q100 Grade 1标准要求,可驱动IC = 150 A,VCE = 1200 V的IGBT,最大开关速度500ns,IGBT”软关断”,5 –30工作电压,工作温度-40℃ 到+125℃,主要用于绝缘IGBT/MOSFET逆变器栅极驱动,汽车用DC/DC转换器,AC和无刷DC马达驱动以及UPS.本文介绍了ACPL- 38JT主要特性,功能方框图,马达控制系统应用方框图以及推荐的应用电路图.
ACPL-38JT:Automotive Gate Drive Optocoupler with R2Coupler™ Isolation, 2.5 Amp Output Current, Integrated Desaturation (VCE) Detection and Fault Status Feedback Avago’s automotive 2.5 Amp Gate Drive Optocoupler with Integrated Desaturation (VCE) Detection and Fault Status Feedback makes automotive IGBT VCE fault protection compact, affordable, and easy-to-implement while satisfying automotive AEC-Q100 Grade 1 semiconductor requirement.
Avago R2Coupler isolation products provide the reinforced insulation and reliability needed for critical in automotive and high temperature industrial applications
ACPL-38JT主要特性:
2.5 A maximum peak output current
Drive IGBTs up to IC = 150 A, VCE = 1200 V
Optically isolated, FAULT status feedback
SO-16 package
CMOS/TTL compatible
500 ns max. switching speeds
“Soft” IGBT turn-off
Integrated fail-safe IGBT protection
– Desat (VCE) detection
– Under Voltage Lock-Out protection (UVLO) with hysteresis
User configurable: inverting, noninverting, auto-reset, auto-shutdown
Wide operating VCC range: 15 to 30 Volts
-40℃ to +125℃ operating temperature range
15 kV/us min. Common Mode Rejection (CMR) at VCM =1500 V
Qualified to AEC-Q100 Grade 1 Test Guidelines
Regulatory approvals (Pending):
– UL1577, CSA
– IEC/EN/DIN EN 60747-5-2
ACPL-38JT应用:
Automotive Isolated IGBT/MOSFET Inverter gate drive
Automotive DC-DC Converter
AC and brushless dc motor drives
Industrial inverters for power supplies and motor controls
Un-interruptible Power Supplies
图1.ACPL-38JT功能方框图
图2.马达控制系统应用方框图
图3.同相抗饱和保护栅极驱动电路图
图4.ACPL-38JT推荐的应用电路图
责任编辑:HanFeng
【免责声明】
1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。
2、本文的引用仅供读者交流学习使用,不涉及商业目的。
3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。
4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。
拍明芯城拥有对此声明的最终解释权。