0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >LED应用 > NXP SSL2103 14W可调光LED驱动方案

NXP SSL2103 14W可调光LED驱动方案

来源: eccn
2019-06-13
类别:LED应用
eye 71
文章创建人 拍明

原标题:NXP SSL2103 14W可调光LED驱动方案

  nxp公司的SSL2103是用于LED照明的可调光Greenchip控制器, 适合于反激和降压配置应用.器件支持大多数的调光解决方案, 具有最佳的效率,中性调光曲线可对数修正到1%,超温保护(OTP),绕组短路保护(SWP)和过流保护(OCP).本文介绍了SSL2103主要特性和优势,方框图,亮度控制框图,降压和反激配置应用电路图,以及SSL2103演示板主要指标,230 V (AC)14 W A55 LED 反激电路图和材料清单.

  SSL2103: Dimmable Greenchip controller for LED lighting

  The SSL2103 is a Switched Mode Power Supply (SMPS) controller IC that operates in combination with a phase cut dimmer directly from the rectified mains. It is designed to drive LED devices. The device includes a circuit to allow direct start-up from the rectified mains voltage.

  For dimmer applications, an integrated dedicated circuitry optimizes the dimming curve.

  • SSL2101: fully integrated LED driver for lamps up to 10 W

  • SSL2102: fully integrated LED driver for lamps up to 25 W

  • SSL2103: gives the application designer flexibility to:

  Use an external power switch to allow the IC to provide any power

  – Use an external bleeder transistors to provide extended dimmer interoperability

  SSL2103主要特性和优势:

   Easy migration to existing lighting control infrastructure

   Supports most available dimming solutions

   Optimized efficiency with valley switching managed by a built-in circuitry

   Demagnetization detection

   OverTemperature Protection (OTP)

   Short-Winding Protection (SWP) and OverCurrent Protection (OCP)

   Internal VCC generation allowing start-up from the rectified mains voltage

   Natural dimming curve by logarithmic correction, down to 1 %

   Suitable for flyback and buck applications

  SSL2103应用:

   SSL applications with various power requirements

   LED modules such as LED spots and down-lights

   LED strings suitable for retail displays, etc.

  图1.SSL2103方框图

  图2.SSL2103亮度控制框图

  图3.SSL2103降压配置应用电路图

  图4.SSL2103反激配置应用电路图

  SSL2103演示板

  This user manual describes a demonstration (demo) board for evaluating an AC mains LED driver with a dimmer for 14 W, A55 LEDs using the SSL2103. It describes key features and connections to aid the design of LED drivers for typical applications.

  The demo board operates from an AC mains voltage of 230 V (AC) at 50 Hz. The resulting design is a trade-off between high-power factor, efficiency and dimmer compatibility. Demo board specification.

  SSL2103演示板主要指标:

  图5.SSL2103 14 W A55 LED 演示板外形图(顶视图)

  图6.SSL2103 14 W A55 LED 演示板外形图(底视图)

  图7.14 W A55 LED 演示板连接图

  图8.SSL2103 230 V (AC)14 W A55 LED 反激电路图

  A55 14 W 230 V (AC) 演示板材料清单:



责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

标签: NXP LED驱动 SSL2103

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案