原标题：NXP LPC1768解决方案

　　LPC1768 开发板可以使你快速建立起基于LPC1768的开发环境。使开发人员尽快熟悉LPC1768的各项共能，并根据开发板提供的各种应用例程，完成开发过程。

　　基本特征：

　　Color QVGA TFT LCD

　　10/100 Ethernet Port

　　USB 2.0 Full Speed - USB, USB-OTG, and USB Host

　　2 CAN interfaces

　　2 Serial Ports

　　SD/MMC Card Interface

　　5-position Joystick and push-button

　　Analog voltage Control for ACD Input

　　Amplifier and speaker

　　Up to 70 GPIO

　　Debug Interface Connectors

　　方案特点：

　　USB 2.0 Full Speed Interface

　　Standard USB connectors for USB Device, USB-OTG, USB Host and UART via USB on the MCB1700 board for applications requiring USB communications.

　　Dual Serial Ports

　　Standard DB9 connectors are on the MCB1700 for both of the LPC1700’s serial ports. Your application may use either of these ports.

　　Dual CAN Ports

　　Standard DB9 connectors are on the MCB1700 board for applications requiring CAN communications. Your application may use either or both of these ports, or they may be disabled with a configuration jumper.

　　100/10M Ethernet Port

　　A standard RJ45 connector on the MCB1700 board connects to an on-board Ethernet transceiver for applications requiring Ethernet communications.

　　LCD Display

　　A detachable, 240x320 TFT, color LCD display. You may use this graphic display device to show real-time debug and program status messages.

　　MicroSD Card Connector

　　A MicroSD Card connector for developing applications requiring access to MicroSD Cards.

　　Joystick

　　A 5-position joystick. Your application may use this to control port pin input.

　　LF Amplifier

　　An LF Amplifier on the MCB1700 connects the D/A output of the LPC1700 device to a speaker. You may use this LF Amplifier to generate sound.

　　Analog Voltage Control for ADC Input

　　An adjustable analog voltage source is on the MCB1700 board for testing the Analog to Digital output feature of the LPC1700. A configuration jumper enables and disables this feature.

　　JTAG and Cortex/ETM Download and Debug

　　The MCB1700 board incorporates both a JTAG interface and a Cortex Debug + ETM interface. When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging. With the ULINKPro adapter, the Cortex Debug/ETM interface allows flash programming and instruction trace debugging.