0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >电源管理 > 基于Powerint公司的LNK576DG超低无负载功耗8W电源解决方案

基于Powerint公司的LNK576DG超低无负载功耗8W电源解决方案

来源: 中电网
2019-04-11
类别:电源管理
eye 104
文章创建人 拍明

原标题:Powerint LNK576DG超低无负载功耗8W电源解决方案

  powerint公司的LNK576DG是LinkZero-LP系列产品之一,无负载时的功耗小于5mW,大大低于IEC所定义的无负载时的功耗,主要用在移动/无绳电话,PDA,电动工具,MP3, 剃须刀等充电器.本文介绍了LinkZero-LP系列产品亮点, 功能框图以及超低无负载功耗8W电源评估板主要指标,电路图,材料清单和PCB布局图.

  Chargers for cell/cordless phones, PDAs, power tools, MP3/portable audio devices, shavers, etc LinkZero-LP, an upgrade to PI’s popular LinkSwitch-LP, incorporates new technology which enables the device to automatically enter into and wake up from no-load mode while disipating less than 5 mW - substantially less than the IEC definition of zero no-load power consumption. The tightly specified FEEDBACK pin voltage reference enables universal input primary side regulated power supplies with accurate constant voltage from 5% to full load. Start-up and operating power are derived directly from the DRAIN pin which eliminates start-up circuitry. The internal oscillator frequency is jittered to significantly reduce both quasi-peak and average EMI, minimizing filter cost.

  LinkZero-LP系列产品亮点:

  Lowest System Cost with Zero No-Load

  Automatically enters zero input power mode when load is disconnected

  Simple upgrade to existing LinkSwitch-LP designs

  Very tight IC parameter tolerances improve system manufacturing yield

  Suitable for low-cost clampless designs

  Frequency jittering greatly reduces EMI filter cost

  Extended package creepage improves system field reliability

  Advanced Protection/Safety Features

  Accurate hysteretic thermal shutdown protection – automatic recovery reduces field returns

  Universal input range allows worldwide operation

  Auto-restart reduces delivered power by >85% during short-circuit and open loop fault conditions

  Simple ON/OFF control, no loop compensation needed

  High bandwidth provides excellent transient load response with no overshoot

  EcoSmart™ – Energy Efficient

  No-load consumption as low as 4 mW at 230 VAC input*

  Easily meets all global energy efficiency regulations with no added components

  ON/OFF control provides constant efficiency to very light loads

  LinkZero-LP系列应用:

  Chargers for cell/cordless phones, PDAs, power tools, MP3/portable audio devices, shavers, etc.

  图1. LinkZero-LP系列功能框图

  超低无负载功耗8W电源评估板

  This report describes a universal input, 5 V, 1600 mA flyback power supply using a LinkZero-LP family of ICs. It contains the complete specification of the power supply, a detailed circuit diagram, the entire bill of materials required to build the supply, extensive documentation of the power transformer along with test data and oscillographs of important electrical waveforms.

  超低无负载功耗8W电源评估板主要特性:

  Ultra low no-load consumption, <4 mW at 230 VAC with 1 mW pre-load

  

  EcoSmartTM – 70% average efficiency, exceeds standards requirement of 67%, and thus meets all existing and proposed harmonized energy efficiency standards including: CECP (China), CEC, EPA, AGO, European Commission

  图2. 超低无负载功耗8W电源评估板外形图

  超低无负载功耗8W电源评估板主要指标:

  图3. 超低无负载功耗8W电源评估板电路图

  超低无负载功耗8W电源评估板才清单:

责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案