0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >LED应用 > 基于On Semi公司的NCV78763单片高效智能功率LED驱动方案

基于On Semi公司的NCV78763单片高效智能功率LED驱动方案

来源: 中电网
2019-03-21
类别:LED应用
eye 122
文章创建人 拍明

原标题:On Semi NCV78763单片高效智能功率LED驱动方案

  On Semi公司的NCV78763是单片高效智能功率镇流器和双路LED驱动器,设计用于汽车照明如远光灯,近光灯,白天行车灯DRL),转弯灯,雾灯,弯道辅助照明角灯等.LED串电压高达60V,每个输出6A,是一个完整的解决方案.本文介绍了NCV78763主要特性,框图, 典型应用电路图,两相,三相应用电路,以及评估板NV787630R1DAGEVB电路图,材料清单.

  The NCV78763 is a single−chip and high efficient smart Power ballast and Dual LED DRIVER designed for automotive front lighting applications like high beam, low beam, daytime running light (DRL), turn indicator, fog light, static cornering and so on.

  The NCV78763 is a best fit for high current LEDs and provides a complete solution to drive two strings up to 60 V, by means of two internal independent buck switch channel outputs, with a minimum of external components. For each individual LED channel, the output current and voltage can be customized according to the application requirements. An on−chip diagnostic feature for automotive front lighting is provided, easing the safety monitoring from the microcontroller. The device integrates a current−mode voltage booster controller, realizing a unique input current filter with a limited BOM.

  When more than two LED channels are required on one module, then two, three or more NCV78763 devices can be combined, with the possibility for the booster circuits to operate in multiphase−mode. This helps to further optimize the filtering effect of the booster circuit and

  allows a cost effective dimensioning for mid to high power LED systems.

  Due to the SPI programmability, one single hardware setup can support multiple system configurations for a flexible platform solution approach.

  NCV78763主要特性:

  • Single Chip Boost−Buck Solution

  • Two LED Strings up to 60 V

  • High Current Capability up to 1.6 A DC per Output

  • High Overall System Efficiency

  • Minimum of External Components

  • Active Input Filter with Low Current Ripple from Battery

  • Integrated Switched Mode Buck Current Regulator

  • Integrated Boost Current−mode Controller

  • Programmable Input Current Limitation

  • Average Current Regulation Through the LEDs

  • High Operating Frequencies to Reduce Inductor Sizes

  • Integrated PWM Dimming with Wide Frequency Range

  • Low EMC Emission for LED switching and dimming

  • SPI Interface for Dynamic Control of System Parameters

  • These are Pb−Free Devices

  NCV78763典型应用:

  • Front Lighting High Beam and Low Beam

  • Day time Running Light (DRL)

  • Position or Park light

  • Turn Indicator

  • Fog Light and Static Cornering

  图1. NCV78763框图

  评估板NV787630R1DAGEVB:功率LED升压-降压1.6A/60V

  图5.评估板NV787630R1DAGEVB外形图

  图6.评估板NV787630R1DAGEVB电路图

  评估板NV787630R1DAGEVB材料清单:



责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案