0 卖盘信息
BOM询价
您现在的位置: 首页 > 技术方案 >工业控制 > 基于ADI公司的ADuCRF101无线风速和风向数据采集系统解决方案

基于ADI公司的ADuCRF101无线风速和风向数据采集系统解决方案

来源: 中电网
2019-03-15
类别:工业控制
eye 362
文章创建人 拍明

原标题:ADI ADuCRF101无线风速和风向数据采集系统解决方案

  ADI公司的ADuCRF101是用于低功耗无线应用的全集成的数据采集解决方案,集成了12位ADC,低功耗ARM® Cortex®-M3处理器, 862 MHz 到928 MHz和431 MHz到464 MHz RF收发器,以及闪存/EE存储器.工作电压2.2 V-3.6 V,主要用在电池供电的无线传感器, 远程医疗系统,资产跟踪, 工业和家庭自动化,健康和健身设备以及安全系统.本文介绍了ADuCRF101主要特性,功能框图, ADuCRF101评估板主要特性,电路图,材料清单和PCB元件布局图,以及无线风速和风向数据采集系统功能框图和ADuCRF101评估板测试建立图.

  The ADuCRF101 is a fully integrated, data acquisition solution that is designed for low power, wireless applications. It features a 12-bit analog-to-digital converter (ADC), a low power ARM® Cortex®-M3 processor, a 862 MHz to 928 MHz and 431 MHz to 464 MHz RF transceiver, and Flash®/EE memory. The ADuCRF101 is packaged in a 9 mm × 9 mm LFCSP.

  The data acquisition section consists of a 12-bit SAR ADC. The six inputs can be configured in single-ended or differential mode. When configured in single-ended mode, they can be used for ratiometric measurements on sensors that are powered, when required, from the internal low dropout regulator (LDO). An internal battery monitor channel and an on-chip tempera-ture sensor are also available.

  This wireless data acquisition system is designed to operate in battery-powered applications where low power is critical. The device can be configured in normal operating mode or different low power modes under direct program control. In flexi mode, any peripheral can wake up the device and operate it. In hibernate mode, the internal wake-up timer remains active. In shutdown mode, only an external interrupt can wake up the device.

  The ADuCRF101 integrates a low power ARM Cortex-M3 processor. It is a 32-bit RISC machine, offering up to 1.25 DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller that supports communication peripherals, serial peripheral interface (SPI), UART, and I2C. Also provided on chip are 128 kB of nonvolatile Flash/EE memory and 16 kB of SRAM.

  A 16 MHz on-chip oscillator generates the system clock. This clock can be internally divided for the processor to operate at a lower frequency, thus saving power. A low power, internal 32 kHz oscillator is available and can be used to clock the four timers, as follows: two general-purpose timers, a wake-up timer, and a system watchdog timer.

  A range of communication peripherals can be configured, as required, in a specific application. These peripherals include UART, I2C, SPI, GPIO ports, PWM, and RF transceivers.

  The RF transceiver communicates in the 862 MHz to 928 MHz and 431 MHz to 464 MHz frequency bands using multiple configurations.

  On-chip factory firmware supports in-circuit serial download via the UART, and nonintrusive emulation and program download are also supported via the serial wire interface. These features are incorporated into a low cost development system supporting this precision analog microcontroller family.

  The ADuCRF101 operates from 2.2 V to 3.6 V and is specified over an industrial temperature range of −40℃ to +85℃. It is available in a 64-lead LFCSP package.

  ADuCRF101主要特性:

  Analog input/output (I/O)

  6-channel, 12-bit SAR ADC

  Single-ended and differential inputs

  Programmable data rate of up to 167 kSPS

  On-chip voltage reference

  Supply range: 2.2 V to 3.6 V

  Power consumption

  280 nA in shutdown mode, nonretained state

  1.9 μA in hibernate mode, processor memory and transceiver memory retained, RF transceiver in sleep mode

  210 μA/MHz Cortex-M3 dynamic current

  12.8 mA transceiver in receive mode, Cortex-M3 in hibernate mode

  9 mA to 32 mA transceiver in transmit mode, Cortex-M3 in hibernate mode

  RF transceiver

  Frequency bands

  862 MHz to 928 MHz

  431 MHz to 464 MHz

  Multiple configurations supported

  Receiver sensitivity, bit error rate (BER)

  −107.5 dBm at 38.4 kbps, 2FSK

  Single-ended and differential power amplifier (PA)

  Low external bill of materials (BOM)

  Microcontroller

  32-bit ARM Cortex-M3 processor

  Serial wire download and debug

  External watch crystal for wake-up timer

  16 MHz internal oscillator with 8-way, programmable divider

  Memory

  128 kB Flash/EE memory, 16 kB SRAM

  10,000-cycle Flash/EE endurance

  10-year Flash/EE retention

  In-circuit download via serial wire and UART

  On-chip peripherals

  UART, I2C, and SPI serial I/O

  28-pin GPIO port

  2 general-purpose, 16-bit timers

  32-bit wake-up timer

  16-bit watchdog timer

  8-channel pulse-width modulation (PWM)

  Package

  64-lead, 9 mm × 9 mm LFCSP

  Temperature range: −40℃ to +85℃

  Tools

  Low cost development system

  Third-party compiler and emulator tool support

  ADuCRF101应用:

  Battery-powered wireless sensors

  Medical telemetry systems

  Industrial and home automation

  Asset tracking

  Security systems (access systems)

  Health and fitness applications

  图1. ADuCRF101功能框图

  ADuCRF101评估板

  The ADuCRF101 is a fully integrated, data acquisition solution designed for low power wireless applications. It features a 12-bit ADC, a low power ARM Cortex™-M3 processor, a 431 MHz to 464 MHz and 862 MHz to 928 MHz RF transceiver, and Flash/EE memory, in a 9 mm × 9 mm LFCSP package.

  EVALUATION BOARD OVERVIEW

  The ADuCRF101 mini board allows a user to program, debug, and evaluate the performance of the ADuCRF101. Its small form factor makes it the ideal hardware for evaluation of large wireless sensor networks.

  Six kits are available, from a mini board only, to a combination of emulator and boards.

  • EV-ADuCRF101MK3Z mini board for 433 MHz operation

  • EV-ADuCRF101MK1Z mini board for 868 MHz/915 MHz operation

  • EV-ADuCRF101QSP1Z QuickStart Plus for 868 MHz/915 MHz operation

  • EV-ADuCRF101QSP3Z QuickStart Plus for 433 MHz operation

  • EV-ADuCRF101QS1Z QuickStart for 868 MHz/915 MHz operation

  • EV-ADuCRF101QS3Z QuickStart for 433 MHz operation

  ADuCRF101评估板主要特性:

  4-layer PCB (33 mm × 55 mm form factor)

  2 power supply options

  2.2 V to 3.6 V from an external power supply

  5 V from interface/emulator board

  Power indicator/general-purpose LEDs

  Reset and download push buttons

  8-pin connector to the interface/emulator board or to RS-232 interface cable (top row)

  Access to ADuCRF101 pins on the two footprints for through-hole connectors on the edge of the board

  32.768 kHz watch crystal footprint

  Matching network and SMA connector for wireless communication

  EVALUATION KIT CONTENTS

  A DVD containing evaluation software, user guides, data sheets, and example code Antenna

  Emulator board (QuickStart and QuickStart Plus kits only)

  图2. ADuCRF101评估板外形图

  图3. ADuCRF101评估板电路图(1)

  图4. ADuCRF101评估板电路图(2)

  图5. ADuCRF101评估板电路图(3)

  ADuCRF101评估板材料清单:

  MK1模型(868MHz/915MHz,差分PA)材料清单:

  MK1模型(868MHz/915MHz,差分PA)谐波滤波器材料清单:




责任编辑:HanFeng

【免责声明】

1、本文内容、数据、图表等来源于网络引用或其他公开资料,版权归属原作者、原发表出处。若版权所有方对本文的引用持有异议,请联系拍明芯城(marketing@iczoom.com),本方将及时处理。

2、本文的引用仅供读者交流学习使用,不涉及商业目的。

3、本文内容仅代表作者观点,拍明芯城不对内容的准确性、可靠性或完整性提供明示或暗示的保证。读者阅读本文后做出的决定或行为,是基于自主意愿和独立判断做出的,请读者明确相关结果。

4、如需转载本方拥有版权的文章,请联系拍明芯城(marketing@iczoom.com)注明“转载原因”。未经允许私自转载拍明芯城将保留追究其法律责任的权利。

拍明芯城拥有对此声明的最终解释权。

相关资讯

方案推荐
基于MC33771主控芯片的新能源锂电池管理系统解决方案

基于MC33771主控芯片的新能源锂电池管理系统解决方案

AMIC110 32位Sitara ARM MCU开发方案

AMIC110 32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于AMIC110多协议可编程工业通信处理器的32位Sitara ARM MCU开发方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于展讯SC9820超低成本LTE芯片平台的儿童智能手表解决方案

基于TI公司的AM437x双照相机参考设计

基于TI公司的AM437x双照相机参考设计

基于MTK6580芯片的W2智能手表解决方案

基于MTK6580芯片的W2智能手表解决方案